20 Most Recent
Gaggia Titanium Espresso Machine Questions & Answers
Replace mother board on gaggia titanium
To replace the mother board, the top cover of the machine has to be removed. I can email the illustrated steps for taking the top cover off as an attachment.
However I am curious to know the following:
1- why this is the only expensive option to fix the machine
2- Is the person who diagnosed replacement of this part qualified to do so.
3- Has the part been taken out of the machine to inspect any visible damage on it like a burn mark or shorted circuits.
4- Is the brew drive system that operates the Brew group is functioning or not.
5- How long the machine was used.
6- Whether the machine was descaled at all and the descaling product used was authentic product (CleanCaf, Brew Rite, Pulycaff or similar product which are sold as descalers but the same are not).
7- I do not support, recommend or sell parts unless I know it is the correct solution to fix the machine.. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a
Screen says brewunit blocked. Brewunit seems clear
Hi
If you remove the brew unit and put everything back with out it the brew unit. Turn th machine on and see if it will cycle? Open the door and look in the back where the brew unit was. There is a cog in the back with teeth. There are 2 large teeth, and they should be at the 10 and 12:00 position roughly. If they are anywhere else you have a broken drive and need to get the gears replaced. If they are in the correct position check the front of the brew unit where the circles are. There are 2 diamonds and they should be pointing at each other. if they are not you need to bring them together with the key tool. Insert it into the center of the circles and turn until they line up, then put back into the machine, and see if it will work. If it still doesn't you have a bad board.
Fill Water Tank But Water Tank is Full
hello in the water tank they is a float it was probably out of water for a while and the float is stuck take the container in our hand and tap it gently by doing that the float gonna get loose move the container you gonna ear the float move put it back fill with water enjoy cheers
Ground coffee will not dispense
The beans are hanging up in the hopper and not falling down into the grinder...... wiggle it, give the beans a push, or go to a bean that is not so sticky....
Not finding what you are looking for?