Questions & Answers for: hoover steamvac cleaning spraying

steamvac quit spraying Hi.... I am cleaning my carpet and everything was fine the "first round". I emptied the dirty water and refilled the clean water reserve and when I tried to pick up where I ...

hoover steam cleaner machine streaking Is it spraying and sucking up ok? Check the filter inside the dirty water tank, it needs a 1/4 in. gap from the top to the top of the filter. If it isn't ...

...Hoover SteamVac Dual V Widepath If you can see the cleaning fluid at the nozzel yet the it does not spray than the nozzles are clogged with dried soap. You can soak the the sprayer in a small bucket ...

Steamvac The last several times that I have used the steam vac to clean the carpet, I've noticed that the solution is not coming out as a spray. Instead it is a steam. Is this normal or is something ...

Hoover SteamVac LS F5899-910 Clean Water Tank solution empties into Recovery Tank while running.... everything else works fine, inc. spraying, brushes, suction. Possible faulty Clean Water Tank gasket

Hoover F5858-910 doesn't spray water the water runs out instead of spraying when the trigger is pulled Hello dc42 & osuguy101. I suggest using a cleaning solution, 50/50 vinager/water, in the fluid ...

...hoover steamvac spot doesn't spray My hoover steamvac spot is brand new out of the box and it wont spray the cleaning solution at all i looked at the tube that it comes out of and it only gets half ...

...Hoover Steamvac Ultra cleaner Pease give me a quick lesson on how to work the Hoover Steamvac Ultra. I finally figured out how to fill the water tank and put it back in the slot. Now I need a little ...

Hoover steamvac won't spray water/cleaning solution MIne won't dispense water and cleaning solution either? Any ideas how to fix it? Clogging of the pump that sprays water/cleaning solution is very ...

...Hoover F5411 Steamvac portable for years and absolutely have loved this little machine. Now when I pull the trigger for my spray to come out it just trickles out. I have taken it apart and tried to ...