Questions & Answers for: hobart lxih 3 dishwasher

Hobart Sense-a-Temp booster heater How do I reprogram the heater for the Hobart Dishwasher? what heater,wash tank or booster and why?

Hobart LXIH displays P2 My dish machine displays a wrench and the code P2, what does this mean? The rinse thermistor is bad,look on the back of the machine to the right and you will see 2 black wires ...

Hobart dishwasher rinse buket filling water Hobart LxiH Rinse bucket filling with water, I check the manual there is no recommendation for check Value. Can you be more specific please?

Hobart dishwasher model LX30H displays -5 on Hobart dishwasher model LX30H lights up completely o nstartup , shows the model number 30, then ,displays -5 , and that's it. by the way you're describing ...

Hobart LXIH dishwasher Hello, I bought a used LXIH dishwasher, but can't figure out where to put the detergent. It doesn't have the tubes for the pumps and the manual doesn't have any instructions on ...

i have a hobart lxih that is leaking from the backflow valve during the wash cycle even after replacing the valve sounds like the wash pipe is no good , i've seen this before

E3 Error code on hobart lx30 dishwasher. my dishwasher Hobart LX 30 will not shut off and displays 30

...hobart lxih dishwasher? The door won't shut so the machine can be used. Check the door hinges.. if a hinge is broke or the door came off the hinge it won't shut.... now if the door won't stay ...

...HOBART LXiH, error code E5. This is supposedly a drain issue, yet when turned off, it drains fine. The wash cycle runs fine, then when it should switch to Rinse, the E5 shows. Tried turning off, then ...

hobart lxih found leaky hoses, and replaced those. Now soon as I turn on the water supply on with the dishwasher in an off position, water continually fills and eventually overflows the tub. Error ...