Questions & Answers for: Altec Lansing fix subwoofer circuit board

...subwoofer box circuit board. Better yet get rid of the connectors and solder the wires on the pc board. If that doesn't work, the controller chip on the pc board has gone bad. PILOTE DE ALTEC ACS ...

...subwoofer. Does anyone have an idea where I can get a replacement part, or perhaps some way of bypassing it in any way? Thank you! tape or solder a piece of metal across where the fuze and holder ...

subwoofer for a school project but i don't want to brake it Remove 8 screws, soak seam plastic with WD40 or lubricant. It takes some tapping work with a long flat metal along edges of seam all the way

...subwoofer and a left and right speaker. When I plug the system in and turn the power on, I get nothing, as if there is no power going to the system. It is manufactured for 120V-60Hz-30W. I am ...

subwoofer, one of the pins of the connector is broken, how can I fix it or get a new connector? if connector is broken, you need to buy a new connector, but it takes a little handwork and some tools a

...subwoofer case that has blown up. I can mend this on my own but can't get any clue how to open up the woofer casing. Its all sealed from evrywhere. Can't get the power circuit outside. Experts please ...

...subwoofer amplifier board.I have an ADA-885 system and bought it brand new back inNovember 2000 and has been flawlessly operating great upuntil this past month when my subwoofer went out but ...

can ido without this board and just use the subwoofer could i use sepparate power amps i just need the sub how do i cunnect You would have to open the cabinet to gain access to the subwoofer terminals

...subwoofer. How can I replace fuse? Have no sound, no power light to speaker w/controls. If your sub is in a sealed enclosure, access is gained by removing the speaker. If there is an internal circuit ...

...subwoofer makes strange sounds like speaker is blown or reverberates. I bought same spec replacement speaker but the replacement speaker makes the same noise. Could it be the transformer or op amp or ...