20 Most Recent
Questions & Answers
Hi. I have an Altec
Any decent repair shop could tackle this problem as I think it's just a bad soldering job. If it is still under warranty contact the firm that makes it. They will advise where to take it.
My led is blinking...and the
Possibel shifting of the frequency of the remote. You can remove the remote and check for fault in the Xtal . Solder the section including the remote controller IC. This can be also defective. If the fault is still repeating a further confirmation must be done on the system receiver before we can confirm to change the IC or the Xtal. Get help from a similar model to cconfirm if you can or else you must take the challenge of changing the IC. Try using a universal remote if it works. Hope you get this right . Good day
A few days ago the
Try removing the wires to the subwoofer and then hook a "aa" battery to it and see if it makes a pop sound..this will tell you if speker is ok...if it is then I think the amplifier sectionj for the sub is what is blowing the fuses...you are probably right..it looks like it's a 1 A fuse...but if it's blowing right away..it may be circuitry related
Not finding what you are looking for?