...LIGHT. Is there any adjustment or programming? Please help us. Thank you and more power! first you press the exposure key and select the manual exposure mode then press and hold exposure key for 5 ...
...exposure lamp light up but the scanne is not moving from to the right. Light then off. Can this be white level not detected - can it be solved easily by changing SBU (CCD) or cleaning exposure glass ...
...exposure settings. The problem is that copier doesnt copy semitone and light colours what on the copy supposed to be gray. Is there any ideas what can I check and do? Does somebody know where is that ...
sir; Here are some problem; exposure lamp, CCD, shading plate position, engine board, inverter board. I would like you check the exposure lamp first, lift up the cover make a copy see the light is on
...light on the minus sign turns off when you have correct or over exposure, then it would mean your indicator lights for o and + are busted. Have your metering checked by a competent camera technician. ...
exposure lamp is light in a few sec. then off then follow this as a guide SC101 D Exposure LampError At trigger on, thelamp was not detected on. Exposure lampdefective Lamp regulatordefective Exposure
...This deals with the Very bright exposure light under the big glass. There is a circuit board that control the exposure tot the orginal document that board is bad or the sensor associated with
how to fix c260 C260 Scanning system related service call Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON. Replace the exposure lamp .. ...
Question about e-Studio 232 Black and White Copier
...exposure lamp does not light, turn off the lamp. After 500 ms, light the lamp again and, a further 500 ms later, check the CCD input. The exposure lamp does not light after 5 retries causes Poor ...
Question about e-Studio 232 Black and White Copier
...peak detection error 1. Exposure lamp light? (output test 03-267) 2. Connector of exposure lamp & inverter 3. SLG board connector & harness Might be SLG board, inverter, or exposure lamp ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions