Questions & Answers for: eureka airspeed start

...it will not power on? I checked or clogs,checked hoses tried different outlets but it still will not power on, any suggestions? It's been three months since I purchased it. Eureka airspeed ...

eureka abs AS1050 will not power on? Will not start There is a wire in the motor housing that comes loose plug it back up and it should start

...eureka airspeed one vacuum about a month ago and used it twice. The last time I used it it started blowing large amounts of dust into the air. I tried cleaning the filter and the vacuum itself ...

loss of suction do not connect to electricity at this point claim a little work area put a blanket down as you are going to strip it all down into little bits clean and then put it all back, Take ...

the vacuum wont start when I hit the red start button it does not turn on It could be many different things. Start with making sure full voltage is coming through the power cord, the switch and all ...

Eureka Airspeed wont start It could be a bad power switch. Do you have a continuity checker or a meter that measures resistance? Put it across the blades of the plug when it is not plugged in and see ...

EUREKA airspeed gold AS1001A upright vacuum to get it to turn on again. The Thermostat is a separate part from the motor that can be bought, and replaced, BUT, I am not willing to purchase a part if I

Why did my eureka multicyclonic airspeed one stop and won't start? The filters may be clogged

My eureka airspeed pro started making a thumping noise. What could be causing it? Thumping usually is caused by a brush roll problem. Start by testing and thoroughly inspecting this area.