Questions & Answers for: OKI drum error

Question about C5100n Laser Printer

1 Answer

...have no idea. please advice if you can. many thanks lisa and mo Fatal Error K (for BLACK) - Black toner or drum problem, Drum life exceeded? Display would of said black drum near life before

Ad

Question about C5200n Laser Printer

1 Answer

...DRUM BUT THE ERROR PERSISTS. I HAVE ALSO CLEANED ALL TONER SENSORS AND HAD PCB'S OFF AND CLEANED AND CHECKED ALL CONTACTS. DO YOU HAVE ANY SUGGESTIONS? Replace Toner and Drum clean everything and it ...

Ad

Question about C5400 Laser Printer

2 Answers

...error mess reads 'K drum kife' and the attention light is always red. Manual says ask for tech advise?I have just replaced the black K toner so I know it's not that. Please help! Thank you Michelle ...

Question about C9600hdn Laser Printer

1 Answer

...Drum Lock Error The K ID unit is not operating properly. Check to confirm that Image Drum is seated properly. Check to confirm that the K ID unit is in position. Replace the K ID unit. Replace the K ...

Question about C5500n Printer

1 Answer

...an oki c5500 and we are having an error 142: fatal error unplug the unit then clean the printer and all drum units and etc with compressed air. Replace the drums and replug should solve the

Question about C5650n LED Laser Printer

1 Answer

Drum Up/Down error 141 - Magenta Drum Up/Down error 142 - Cyan Drum Up/Down error Resolution: 1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage. 2. Reseat the Toner

...HAS THAT MESSAGE MY C5500 OKI PRINTER HAS ERROR SAYS REPLACE IMAGE BELOW THAT IT HAS 561: M DRUM LIFE. oki printer c5950 fix new cartridge & drum coming error replace image drum 561:m drum ...

Question about C5500n Printer

1 Answer

...TONER SENSOR ERROR NEW TONER AND DRUM INSTALLED, SAME ERROR. remove drum units and clean optical sensors located at the back end of he drum slots and clean corresponding reflective plates on drum ...

...Drum Up/Down error 141 - Magenta Drum Up/Down error 142 - Cyan Drum Up/Down error Solution: 1. Reseat the Image Drums. Ensure they are in seating properly into the drum carriage. 2. Reseat the Toner ...

Question about C3200n Led Printer

1 Answer

oki b431 black image drum lock error The drum lock error is caused by one of two items. Either the drum has seized and will not turn or the drum motor has failed and requires replacing.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment and Supply Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...