Question about HL 1440 Laser Printer
...data light when unit is turned on it goes through it's turn on cycle. After this is done, the alarm and data lights are flashing. Why is this? (blinking every 5 seconds) Toner Low Indicates that the ...
...light and data light blink every 5 seconds- TONER LOW (purchase more toner and have it ready when the 'toner empty' is indicated). If alarm light and data light stay lit- TONER EMPTY (replace toner ...
...light on Data light on Alarm and Data lights on together is from low toner. If shaking of the toner cartridge is not helping, change the toner. Drum light is usually on because of the print counter. ...
...light and data light blinks On this printer, the alarm and data lights mean that the toner cartridge is empty. When you replace the toner, be sure to slide the corona wire cleaner across and back. ...
...light Greetings: My red "alarm" and yellow "data" lights are blinking. Does this mean I need to replace toner soon? Generally if both the (red) alarm LED and the (yellow) data LED are both blinking, ...
Question about HL 1440 Laser Printer
...data light is AMBER - both are on permanently Alarm light is RED and data light is AMBER and both are on permanently. Printer will not do anything. This means toner is empty. This condition was ...
...alarm light and data light stays on. Does this indicate that the drum and toner need to be replaced? Yes, drum light means drum is nearly used up, and alarm plus data means the toner is almost
data light is green. When I press the reset button the ready light does not stay lit. Please help. Because I was getting gray shading on my pages and data was still being printing, I decided to change
data light on solid Alarm and Data lights both on solid indicates, out of toner. Toner cartridge needs replacing. Visit the link below to download a user manual for your printer. Hope this helps. http
Question about HL-2070N Laser Printer
light on back of printer by network cable they mean you are connected to the internet. flashingmeans you are sending and receiving data. Previous answer close but inaccurate. It means that the network
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions