According to the operation manual: If alarm light and data light blink every 5 seconds- TONER LOW (purchase more toner and have it ready when the 'toner empty' is indicated). If alarm light and data light stay lit- TONER EMPTY (replace toner cartrige with new one).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Follow the link below for what the lights on the machine mean. I know that if your alarm and data light are on it means the toner is empty, and you wont be able to print, you would need to replace the toner cartridge, please follow the link below.
Because I was getting gray shading on my pages and data was still being printing, I decided to change the toner cartridge. Now the pages are clean and white and all the lights function properly. Most cartridges that are running on empty don't print any data at all or at least print the data at the top of the page and gradually gets fainter sp? on the page. Who would have thought just by changing the cartridge would solve the problem? So glad that's all it was........wasn't excited about having to buy a new printer.
Alarm and Data lights on together is from low toner. If shaking of the toner cartridge is not helping, change the toner. Drum light is usually on because of the print counter. If the print quality goes really bad, change the drum and reset the counter by holding the front button wile the front cover is open till all lights come on. Release the button and close the cover. If just Data light is on, check the print ques, some jobs might got stuck there.
take y'r drum and toner out of the printer.. now there should be two translutent white circular film on either side of your toner... what u have to do is take a small piece of paper and make a bead out of it and insert that small paper bead right in front of those film.. u can insert on both side or on just one...
if u don't find those circular film then open y'r HL printer toner loading tray and turn y'r printer ON.... u will see green or red light coming out of either side of y'r printer where toner sits.. thats the place u should look for those film on y'r toner....
(blinking every 5 seconds)
Indicates that the toner cartridge is nearly empty. Purchase a new toner and have it ready for when Toner Empty is indicated.
Replace the toner cartridge with a new one.
User's Manual is available at the following location:
Hope this helps.