Questions & Answers for: copy machine squeaking

...machine being a scanner. If I copy a sheet, the glass scanning base works properly.2) very annoying problem: the mechanism that rolls the paper is very noisy and squeaks like a door hinge that needs ...

Paper failure Sends a fax. Will not connect to copy a paper. Starts to work..squeaks..comes up with same message: Paper failure: Reload paper then press Start.Just keeps sending this same message. If ...

ML2250 Laser Upon turn on it groans and squeaks. This goes on for 10-15 seconds, then the noise stops and the red error light comes on. Could this be a bad cartridge? There is no paper caught in the ...

...copy with no squeaks. Any suggestions? THIS IS A HARD ONE, THE BEST THING THAT CAN TELL YOU IS TO LUBRICATE ALL THE GEARS IN THE MACHINE, THERE IS A SLIGHT POSIABLITY THAT IT IS COMING FROM THE FUSER ...

my panasonic workio 3030 squeaks while copying and is leaving a light dark trace on the bottom of the page. I would recommend having a trained technician replace the roller kit and do general cleaning

...machine is squeaking while printing or copying all of a sudden-any ideas on a quick and easy fix so as to avoid service calls? Probably paper dust stuck in the gears, you can try to blow it out with ...

Hi, There are two problems: 1) When I run original docs through the feeder, the copies come out with some black lines running vertically - there are no lines when I put the original on the glass ...

It squeaks when we make copies. The only thing you can do is replace to toner cartridge. If you have an old one you can test to see if it is the cartridge. But DO NOT OIL YOUR MACHINE. Steven ...

...machine squeaks very loudly. How can I fix this? can you say from where the sound comes? If from left side check the drum unit and fixing unit. If from back check if all plates or main motor, or fan ...

...squeaking. Any suggestions? How old or how much use does this machine get? The older/more use it gets, the more likely it is to start making random noises and squeaks. It could be a lose belt or just ...