Questions & Answers for: chainsaw burn

Question about 30.1CC Chainsaw With a 14 In.bar and Chain

1 Answer

engine smoke when chain brake on Brake band seems tight around clutch but shortly after starting smoke comes out from under saw.I dont know if excessive but some oil on inside of clutch cover thanks ...

Ad

Question about 30.1CC Chainsaw With a 14 In.bar and Chain

1 Answer

Won't start not getting fuel. It will start if starter fluid is sprayed into carb area, but shuts off when fluid is burned off check for rot , fuel filter, primer bulb broke,. carb clean?

Ad

Chainsaw 35cc/cm,saw keeps cutting off, not getting enough gas. How do I adjust carburator? I can't find manual. Thank you the carbuator has two 2 adjusting screws on it.one is high side and the other

Question about Chain Saw 20" Bar

1 Answer

...chainsaw If you didn't burn up the engine yet, DON'T USE IT. Dump the gas back in the can, and then mix the oil. If you used it, and the chainsaw died, its done. Not worth even trying to fix. You ...

Question about 16" Electric Chain Saw Assembled 3.0 Peak

1 Answer

Remington 16 inch chainsaw model 107624.01 . A friend burned out the motor can this be fixed. The saw was like new. Thanks Lou anything can be fixed,but if your friend burned the motor,and if he is a ...

Question about ChainSaw 18 in Bar 32 HP Model 350

1 Answer

chainsaw is firing and getting gas but will not start even with a little shot of starting fluid Sounds like the rings may be burned out.

Question about CS600P Gas Chainsaw 20 Inch

1 Answer

i have a echo cs-341 only way it will start is if the muffler is off. any ideas? i did pull the screen still did not help. thanks I guess the muffler is blocke inside with carbon, burn it out with a ...

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

1 Answer

won't start In my dealings with electric chainsaws if you try to cut wood too big in diameter the electric motor burns out and you will net to replace the saw

Question about 662 667 Chainsaw Carb Carburetor

1 Answer

...chainsaw carburetor adjustment most non professional grade or smaller saws are only adjustable by re jetting the carb. if they are adjustable there will be a low, high and idle adjustment on the side ...

Mt999 chainsaw. Brand new. Not cutting through wood although blade rotating. Just seems to be burning wood. If it's all brand new, then sounds like you have the chain on backwards. The angled parts of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...