Questions & Answers for: blown fuse lg washer

Question about WFT1071TP Top Load Washer

1 Answer

...Lg wash machine do not normally have fuses. 90%chance the board is blown. Trace the power to the board. if there is power, boarb is faulty. there should always be am indicating light of a sort when ...

Ad

Question about WFT1071TP Top Load Washer

3 Answers

...fuse had blown. There is a circuit diagram on the back of the washer that allowed me to locate the fuse. Take off the rear top plastic panel (behind the folding lid) by removing the two screws on the ...

Ad

Question about WM-2277HW Front Load Washer

1 Answer

fuse may blown in the power supply inside the washer beware if you put another fuse in and it blows again the you have a dead short on the board someware also make sure you use the same rated fuse the

Question about WM-2277HW Front Load Washer

1 Answer

...fuse on it this might blown if it has make sure you put the same rated fuse back  in. if it blows again then there's a dead short in the washer i hope it helpsregardsshaun   

Question about WM-2277HW Front Load Washer

1 Answer

...blown fuse, and check the outlet for power by plugging a known working item into it or using a circuit checker.If the washer is getting power, try holding the power button down(if there is one) for ...

Question about WM-2032H Front Load Washer

1 Answer

...fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside the washing machine main housing ...

Question about WM2301HR 4.2 cu.ft. Ultra Capacity Front Load Washer with NeveRust Stainless Steel Drum

1 Answer

www lgservice com IT WON'T TURN ON HAS NO POWER? check the terminal and house outlet for power? then check for a blown fuse in washer

Question about WT5101H Top Load Washer

1 Answer

...to power on, the outlet is working? What could the problem be, this washer is only 9 months old Power cut may have blown fuse . If not check mains filter. If that's ok then mother board may be ...

...fuse which may have blown because of an overload? what's the model number?what kind of a stack is it dryer on top of a front load washer or one piece,also if the dryer is gas and not using 240 volts ...

blown fuse. No power or response when pressing the power button Home outlet and fuse are good Hard reset worked once, but no longer does the trick This is about a washing machine, sorry I posted it in

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...