Questions & Answers for: agitator stopped turning

...agitator not turning. Take off the top of the agitator. If any screw are available remove them. If not grab the agitator from the bottom and yank off. Unscrew the agitator drive cog and inspect ...

admiral washing machine AAV7000AWW won't stop filling or agitate? Hello, Admiral washing machine AAV7000AWW won't stop filling and overflows. When I manually turn ther timer to make it stop then it ...

agitator is weak Durring the wash cycle, I can reach in and stop the agitator from doing anything. I take it the motor was still running and you could stop the agitator. Pull the agitator off by ...

my agitator turns sopradically. the agitator turns a little and stops. I can hold it down with my hand and it turns. But it feels like something is stripped. What can I do about it? pop the cap off it

...agitator of my stack washer starts turning at the start of any wash cycle while the tub is being filled, does this on fill-up for rinse too. Known: (1) water fills the tub to the desired level, no ...

...stopped since the mechanism to engage the agitation to one direction of motor turning is not engaged. It is a helix nut to lock in the direction of motor turning (motor has 2 direction : one is for ...

Kenmore washer model 110-13212200 will not stop filling the water or turn off so as to agitate. It will stop if the start button is pulled. Even if the load settting is place in 'small' statu ...

...stopped turning the agitator. It only moves back-and-forth, but doesn't move the clothes around because it has stopped the full circle motion that would normally accompany the back-and-forth ...

the agitator is only working in one direction so the washing is getting tangled The top portion of the wash tub agitator is designed to rotate in the clockwise direction. It should be intermittent. ...

...agitator from turning as I try to unscrew it Simpson enduro 801 To stop the agitator from turning as you try to unscrew it on a Simpson Enduro 801 washing machine, you will need to first unplug the ...