Questions & Answers for: Xerox 4 361

xerox 3535 error code mmachine goes into scanning mode, wont exit,. also error code004346. went to xerox site , look for 3535, type in error code, saw what the problem was. 004-361 eror cods

Xerox DC12 system failure: code 10-361 An error code 10-361 appears on display after about 10 min when the DC12 is turning ON. I know this says about Drum Heating problem (Drum not enough hot), but ...

I have a EX-3535 fuser error code 004-361 coming up on a new fuser on a machine. I changed the fuser for another new one and still get it so suspect I need to do an NVM setting but don't know which? ...

dc 3535 004-361 you have a problem with color drums motor, try to rotate in a colckwise manualy each color drums, if someone is hard to turn (comapred with a new one) replace it and problem will gone.

xerox 3535 ero 004-361 Hi Error code 004-361 means Drum error or Drum motor failure. You'll need to check the drum cartridges, remove the cartridges to check. Now enter DC330 [004-003] and press Start

I have a fault code of 4-361 any idea what it is? 04-361 is a code 60 imaging unit motor failure. It is rare for a motor to fail so it may be one of your imaging units has seized. Remove the imaging ...

Xerox digital 700 color press error code 010-319 in service reset NVM 744-361 --- > 0

i having dc3535 coming error 116-361 Perform re-installation of the ESS software.If the problem continues, replace the ESS PWB

000-361 code come on my machine model color xerox 7345 when i oon the above machine.after one copy error code 004-361 coming on the display ...