...module from the direction that you would connect the cord to. it is labeled F1 and it is a 4a 250v. This is not the problem with my power supply though. I suspect one of the components under
Question about 828FI 15" CRT Monitor
dell monitor 828fI NEEDS A FUSE ON BOARD H 250V T3 15A I PAID FOR THIS DISPLAY THEY SAID IT WORK.I PLUG IN NOTHING I PLUG IN MONITOR THE POWER LIGH COMES ON.UNPLUG GOES OUT.OPEN IT FOUND A FUSE THIS ...
Question about UltraSharp 2405FPW 24" Flat Panel LCD Monitor
...get the case open. C605 capacitor had failed in exactly the way described, and the main fuse (T4A 250V HBC 20mm x 5mm) was blown. I could find no other damage at that point so replaced the fuse (in ...
OPen the tv up I am looking at the top board and i noticed that the 2 250v 1000uf 105c caps are buldging/swollen. Could this be the problem i am getting the red light/led on that board? Looking at the
Question about W4200 42 in. HD-Ready Plasma Television
PC power supply fuse - T6.3h 250v engraved on end radio shack 250v 3 amp fuse found in store, fast blowing, does not look the same - original has what appears to be a ceramic body, fuse from store has
...may be in the power supply I had same problem. Changed power cable...nothing. Changed fuse (315mh-250v), reassembled and I am now looking at it! oops..meant 315mA-250v) ...
Question about UltraSharp 1800FP 18.1" LCD Flat Panel Monitor
...Lansing ADA-745 speakers/subwoofer. The back of the subwoofer has a label which reads 'T1A-250V' type fuse. This means a 1-amp, 250V fuse. I found a 4-pack of these at Radio Shack for ...
...to see if I could fix it. I just had to replace the fuse and it works great. You'll need a 2.5A 250V time delay (i.e. slow-blow) fuse. The part number of the stock fuse was T2,5H 250V. To get to ...
...transformer are not burnt out. The input voltage of the inverter board is 24vdc the output is 250v ac..The voltage input terminal of the inverter board usually creates a loose solder. Use a ...
... I purchased a new fuse at Radio Shack (4 for about $3), and then replaced the fuse (a T1A-250V). All working great now! By the way, when you buy the new fuse, make sure ...
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions