Philipe home cinema - No Disk Error

To make your Philips HTS5593/12 region free (this works on a purchesed in the UK and other countrys in february 203

1. Make sure there is no disc in the tray when you switch on.
2. Press "home" key on remote control.
3. Enter number "1389310".
4. Switch off. Wait a few seconds and then switch on...now region free.

Please note, the above hack has only been confirmed as providing region-free DVD, not Blu-Ray.

Did you get any answer as i faced same problem... and it's hard to find out how to fiw or even replace it

HI,
ur dvd player has region lock . it will not play all the disk. check the DVD OF STAR WARS MOVIE which region it belongs. jus try the following not sure is it work or not

Open the tray. Press 99990 on the remote.
by doing this ur dvd player will become region free
then insert ur dvd and try.
for region 1 and region 2 code is 99991 ,99992 respectively.
feel free contact through fixya.
ok

Most philips units can be easily converted (sometimes so easy you just dont want to know)

What you are going to search for is "philips region free hack" or "hts 660 region free hack"

I am unsure of FIXYA policy for providing the information directly so I gave you the words I would use to find what you want

If you are given an ISO file to download then tjis must be burned to a cd first

I agree that the region thing should be banned and customers should have the choice

Hi,
This is due to the lense problem, when there is "disk error" and "no disk" appears due to defect in the lense and tray with motor problem,
You can repair this issue by technical method by replacing the lense with motor set this will resolve your issue.

Thanks dude,

Not sure which trick worked, but i did ur classic 7,3,4,4,6,6,0 trick, got no message from the player. So i did pressed 0000 after that. Still no message appeared. But when i pressed start....it worked!!!!!!

Thanks a ton!!!!!!!!!!!!!!!!!!!!!!!!!!!!! God Bless...

Hi,
I have a region Code For A Philips HTS-3544 which is 1 model Down. You can try it, it may work or it May Not.
Heres How:- power on the TV/DVD without any disk in the player.Press open/close eject.
Press Stop 7.3.4.4.6.6 ( on the Remote )
The menu code appears On The Screen.
Press 0 for region Free, or the region Code Required.
Power Off and then on Again, if the codes have worked, your dvd player is now region free.

If this works please rate as Fixya.

many thanks mike @ Compurepair.

please switching on and off

i had the same ploblem sometime last year and all i did was to put a cleaning disk(the ones with a cleaning brush on) in it a couple of times...and it works fine since then!

Cleared