Kenwood, audio, cd,dvd, come with the funtion .theft system.
The problem is if you activate the funtion. the only way to unlock
Is with the code. But you must set up a Personal code to activate the funtion. Only you know.
If you are not the first owner. you need to locate the the first owner. to ask for the code xxxx
But if you accidental activated the code funtion. without put the personal code. The DEFAULT code is 0000.
with the Tune botom you change the digit + or - .
OK.. I hope this help on your question.
You are referring to the theft code, correct?
If so, you may wish to review this document. It should help!
Brian
There is not an ENTER required, it will know when you have entered the code.
Please refer to the article that I have posted above!
×
95 views
Usually answered in minutes!
is no speaker, the problem is in the radio model(kdc-mp3035)
Im agreeinq with you.after puttinq the four zeros
which is the enter button. that the radio require
×