Hi there my Sanyo VPC-E890 camera connects to my computer i download the software for it and nothing happens my pictures don't show up any where if you could help me with this problem i would be very happy.

You don't need a driver.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

You don't need any software.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

when your device shows the "low battery" signal. That is the best time to recharge the batteries.... Do not over charge them..

You don't need any software in order to use your camera.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo cataloging program such as Picasa.

Hi Claudia,
You have not mentioned the operating system to which you want to connect the Sanyo VPC.
The DISC is not available for this Camera however you can download the Driver Utility which will find the drivers.
Driver Utility
Connect the Camera to the PC and Download the Drivers.
Regards,Suhail

You can download here :
www.softlookup.com/driveauthor.asp?id=3295 www.download.cnet.com/SANYO-Digital-Camera-PC-Camera/3000-2116_4-96847.html www.givemefile.co.uk/drivers/digital_foto/sanyo/vpc-s60ex.html

Hi all camera has a usb cable together with box and also CD software. tryo to connect you camera using usb cable to your computer and it will show found new hardware and then check to may computer if you see your camera model. if you cannot see try to download the cd software and after finish that connect again your camera.

goodluck and thank you my friend

Electronics are fubar.

I had a simular problem with my Sanyo. I purchased a new battery on E bay, and charged it up, and it worked again.

http://download.cnet.com/SANYO-Digital-Camera-PC-Camera/3000-18489_4-84699.html
Download the Sanyo Digital Camera software at the link provided