After booting can't fined hard drive - Jetway K8M8MS Motherboard

This error means your hard drive has died or your boot files have been corrupted on the hard drive. You will need to check your BIOS to see if your hard drive is listed. If it is, your drive may be fine and your notebook will need to have Windows reinstalled/repaired using a thumbdrive or external cd/dvd drive.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

if you want to use another hard drive you have to install a new Windows Operating System

restart the system, while restarting , press delete/F8 to enter in BIOS menu, select boot priority and select the primary HDD as first boot device, deselct the "boot otehr device" option.
it should work fine.,
Cheers!

Try checking your bios to see what harddrive the computer boots from.
Your PC might be trying to boot from that samsung story which I assume doesn't have an OS installed.

Cheers

clean the ram and insert again....

Usually when your BIO's doesn't detect the hard drives is usually a good indicator that the hard drive has failed. In rare instants it is the motherboard. In the boot sequence it will only show the hard drives it sees if it doesn't see any then none will be shown. I would start with a new hard drive.

Hope this helps.

probably the mother board.if you boot from the CD will it boot?

hi
please pres dell WHILE BOOTING YOUR SYSTEM GO TO THE BIOS AND BOOT OPTION DISABLE BOOT FROM USB AND GOTO THE USB SETTING AND MAKE THE USB AS GENAREC AND EVERY THING WILL BE FINE
GOOD LUCK

Certain diags only test the diagnostic tracks. That is what's passing more than likely. You should boot the laptop in safe mode (F8) and click start, run, type in cmd, hit enter and type scandisk. This will do a complete scan on the drive. If there are any errors replace the drive.

S.M.A.R.T (system monitoring)is the warning software that detects when a hard drive is about to fail, so i would back up any important docs to a disc or usb drive immediately and replace the hard drive. The hard drive controller itself will not be the problem, it's the controller saying that the problem is the drive, the controller is only a driver and not a peice of hardware, pressing F1 will ignore any faults and continue to boot, but especially if it doesnt always boot it's definately your hard drive.