NEXSTAR-SX USER MANUAL - Computers & Internet

http://www.celestron.com/c3/images/files/downloads/1150227146_11049manual.pdf

www.slimwareutilities.com slim drivers. It is free!

You can get relatively cheap (~$5) user manual for SX-E66 here:
http://www.manual-buddy.com/p/technics/sxe66-user-manual.html

They state that's in German only but I ordered it some time ago and they had English version as well.

• Here is a users manual for a SX-KC200. The models were back to back and almost identical. The SX-KC200 was the model that came directly after the SX-K200 and had just a couple small additions added. In other words this manual will work just fine for the SX-KC200 as well as everything will be covered in it. http://service.us.panasonic.com/OPERMANPDF/SXKC200.PDF
• Hope this helps and thank you for using FixYa.

Regards, Tony

I just bought the 260U2, same deal. Take it back and demand a discount for one that works. Bring your hard drive and confirm it in the store.

You haven't actually asked an intelligible question, but if you intended to ask for a Polaroid SX-70 user instruction book then see the address below.

If you're asking how to creatively manipulate SX-70 photos then any search engine will give you a wealth of tips and tricks for the best results.

http://safemanuals.com/user-guide-instructions-owner-manual/POLAROID/SX%2070-_E

Ok, here's some step by step instructions.

First is the light on the nexstar coming on when you plug it in, if so what colour? If not try using both USB connectors on the PC end to plug in, it's possible you're not getting enough power if the light is not on as many 2.5" hdd enclosures require 2 USB connections one for power and data and the other for additional power.

Next, if the light is on but no drive in my computer, right-click on my computer, then left-click manage, select disk management from the MCC window that pops up. If your Nexstar HDD shows up here, identify it on the bottom part of the window and report back what is said there.

If it is not there and the light is on, try a different USB port. If the light is not on or you tried the other ports and still no luck the enclosure itself may have failed.

Try moving the HDD into a new enclosure and try again. If this works, Great, if not then the HDD may be damaged and may need a pro to get your files back. If that is the case report back here with your progress and region and I will recommend an appropriate pro.


Hope this helps FixYa,

Chris

Looks like a scanned version of the user manual is available on
http://www.pioneernz.co.nz/Site/Pronto/Files/user_manuals/SX255R%20USER%20MANUAL.PDF

good luck to those who have been on this post