I got a Sanyo VPC-E1000 10 mp digital camera for christmas and for no reason its stopped taking pictures. The button isnt jammed because it still records videos but theres nothing in the settings that is wrong. i cant find a number to ring either. please help

Download to a computer or buy new card.

press the flower button next to the ok button look at screen when u see pf in the lower left corner it is on this will stop the delay's

You must take pictures gently. Blur picture may occur if you move during capturing a picture. Or your hand move too fast after taking a picture. Try to stay still for two or three second after push the capture button.
Blur picture when shooting outdoor can be caused by too much light. Don't forget to set your camera in outdoor or panorama mode, and turn of the flash light if you think its too bright.

Hope this help and RATE please !

there is a button on top of the camera next to the power buttong to the left, try pressing that

Hi.

This is a common problem.

You can send camera for repair here: Repair.

See here an article: Sanyo digital camera is not starting and you get lens error

You need to take your brand new camera back. You are not supposed to fix a new camera...you're supposed to enjoy it!

You should try cleaning the shutter flaps with a can of compressed air. Maybe it helps.

hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes...
thank u!!!
rate me!!

You should do the same process like above to unprotect the images. Trying to delete is wrong.
If this helpful please vote with high rank Marie. Thank you.

better you should go to sanyo showroom and give it for service they will get you the replacement buttons