Lost original remote control, want to buy factory replacement. type tv is an apex at2402.

Hello
Philips universal remote control cannot be synchronised with Apex Digital TV. There is no code for Apex with it. There are very rare remote controls which have codes with Apex Digital. Comcast On Demand Custom DVR 3-Device Universal Remote Control is one amoung them. Codes for Apex Digital Tv; with this remote are:
0748, 0765, 0767
Buy this one. It can be sychronised with most of the present devices. OK.

hi,

To unlock your TV you must need the original remote of it. If you don't have then you have to purchase it. After the do the following for unlock you TV

Apex TVs have parental locks that allow you to block certain programs based on their rating. When this feature is no longer needed and you want your TV to display all programming no matter its rating, you must unlock your TV. Unlocking your Apex TV is done completely from your remote control and does not require any tools. The process takes less than 5 minutes.

1. Press the "Menu" button on the remote control and use the arrow buttons to scroll down to the "Parental Guide" option, then press the "Enter" button.

2. Type in the default parental code "6688" if you have not set your own code. If you have set your own code, type it in. If you set your own code and forgot it, override it by using "6688."

3. Use the arrow keys to switch the parental lock to "OFF." This allows all programs to be viewed no matter the rating. Press the "Exit" button on the remote and start watching all your channels

ok

OK . . .

First, press the TV button at the top of the remote so the remote is operating the TV rather than the cable box. Then try these combinations - hold down both keys at the same time for 1-2 seconds before trying the next one.

ENTER and TV (on the top row)
ENTER and MENU
MENU and TV (on the top row)

If these don't work, try holding down the MUTE key and then press other buttons on the remote one at a time while still holding down MUTE. Do not use the number keys (0-9), the POWER key or any of the keys on the top row (DVD, AUX, etc) except for the TV key.

If this doesn't work, please post back with the model number of your AT and T remote and I should have some other suggestions. If it's not printed anywhere on the remote, the model number should be inside the battery compartment. If you remove the batteries, replace them quickly or you may lose any codes you have programmed into the remote.

I'll wait to hear back from you.

Anyone looking for assistance with unlocking this TV, with the original Apex remote, please click on this link for instructions:

http://www.fixya.com/support/t8361476-locked

U want complete remote functions,buy a original remote.The universal remote,u get,what u get.Try website like Remotes.com to buy the original remote.

press the function key and the mute key at the same time :)

Try changing your screen size,you may have it zoomed in but its something to check.

Try website 1-800-Remotes Factory Original.To buy a original or caompatabile remotes .Well not find the universal codes if ur user manual came with it.Those manual codes didn't work.

Best it to buy a same exact remote.Try website 1-800-Remotes Factory original.Universal remote manual codes didn't work.U out of luck most of the time,finding codes that work for the remote u buy.It amost imposssible.

I had a paper for a remote... think it is the phillips universal remote.
it said apex tv codes were as follows: 023 and 741
apex audio is: 068
apex dvd is as follows: 044 146 347 545 547 640 644 740 741 840

best of luck

if there's a channel and volume display but no picture,the problem of your tv is ABL..it is a resistor value from 10K ohms up