JVC GR-D275 not seen as connected to computer

Hi Parker,

First of all you need to install GR-D275 driver on your PC. This driver should in one package with your camcoder when bought.

If the driver has been installed on your PC then your camcoder being connected to PC, click right bottom on yourpc screen tagged with ' Shows hidden Icons while you pointing the 'up' arrow. Then choose USB icon and search for your camera .


Regards

You badly need CD, visit your nearest JVC Center, you can ask a copy of it, you might need the application software as well, it comes all together too large to send via email. Important Note, Connect first your cam and pc before installing the driver. Hope it helps

You should try JVC download center
http://www.victor.co.jp/english/download/index.html

try to ccd base and iris unit on optical block assy

sack whoever told you not to use firewire - buy a card for your PC and cable suitable for the camera (likely to end up being a 1394 to iLink). USB is wholly unsuitable (1.0/1.1 is too slow and 2.0 not stable enough) for transferring video at the bitrates that come from DV. Firewire is designed almost exclusively for high-bandwidth applications such as this.

http://www.productshub.com/JVC-GRD750/ just click this link and check out.

Hi, I am not sure. But I believe the camcorder has to be on when you connect to the computer. and I assume you use firewire for this particular camcorder.
I too once had this problem when I used Windows Vista. If you too use Vista, try it with Windows XP.

cheers,

how can download my video my cumputer

You would need to use iMovie. Most MacBooks come with this already installed but if you can't find it you might have to buy it from apple's website. All you have to do is open iMovie with the camera connected and on and import the movie into iMovie, then you can edit the way you want it to be. iMovie has some great tutorials as well. Importing and editing can take a while, however.

Many Camcorder users have faced problems while connecting their camcorder to their PC. One of the most common problems is ?no activity? after connecting the camcorder to the PC. The found new hardware wizard does not run and fails to detect the camcorder. This can mean two things. Either the DV port on the Camcorder is not working or the FireWire cable is faulty. Try using a different FireWire cable. If the camera is still not detected by the PC, try connecting it to a different PC. If the Camcorder is still not detected, then your camcorders DV port is most likely at fault. Confirming that the FireWire Port on you PC is working fine You can check the status of the FireWire port from under Device Manager. To access the Device Manager, Right Click on My Computer and then click on Properties. Select the Hardware tab and click on Device Manager. If you cannot see the FireWire port in the list, then it is not inserted properly into the motherboard. If you see a Yellow exclamation mark, then you need to install the drivers, which are usually bundled with a Floppy or CD with the FireWire card.