The machine wont boot, when i press on it bilks and goes out. i tried a hard boot by removing all periphals and reinstalling? is this a motherboard issue?

Hi Rakesh,
Try pressing Ctl > Alt >Del and see what happens.Solved?

• Remove the hard disk and re-fix it again.Try booting now.Solved?
• Then your Operating System may have crashed!Remove the hard disk and enslave it on another machine with a good Operating System as a secondary storage device and reboot this machine.
• On start up,press F1 to accept runnig unnix and the damaged files on your drive will be repaired.Remove it and install it on your machine.
• Now try booting your machine.

Hope this helps.Thanks!
Please vote answer if helpful.

I would try cpu next,dead cpu will do what you are discribing

Bios flush & windows repair.

Try refreshing the connections of the HDD, and CD/DVD ROM drivers to the motherboard. Also check the jumper settings of the Drives. Hope this helps.

Hello there: here is a list of things to try
first make sure that you monitor is working try it on a nother computer if you have axcess to one
when the computer boots up is there any beeps please let me know

you may also want to turn off the computer and open the case and remove the powersupply harness that goes to the motherboard then press the power button for 1 minute to release any esd that may have built up then reinstall the harness to the motherboard.

ensure that all of the cables are securly connected unplugging and reinstalling them can help. also since the case is open this will be a good time to clean out all of the dust and critters that may be hiding in there

if you have a removable video card and if you can get a nother card to test with please try it
if not remove the card restart the machine after you hear the beeps turn off the computer reinstall the card and than reboot the machine ok please try each of these and keep me informed how this goes
best regards mike

It is not a hard drive issue. If hard drive is a problem system wont boot till motherboard processor. Try to reinstall your OS. It will fix your issue.

Hello there
first i would remove the battery on the board and see if it is good if so replace it and now remove the power supply to the motherboard for 2 min and press the power on button and the reset button
now plug in the power supply to the motherboard back on and plug in the computer now you should just have top reset the time and date ok?
best regards michael

Check the RAM in you computer. When the RAM goes bad, the first reaction is not to boot.

This is due to a hardware conflict.
The system drivers on the hard drive are for the old mother board and devices,You will have to reinstall OS while it is install on the new mother board,The computer cannot boot to a drive that is loaded to another system unless all the devices and drive are identical.

Please rate this a fixya

Have you done any setup to the new hard drive? Any new hard drive will come with no data on it. This means you will have to reinstall windows onto the new hard drive, or copy windows from your old hard drive(if it still boots up) using the CD that came with the hard drive. If your hard drive didn't come with the software, post which hard drive you have, and I can give you the link to download it.
Try and find the Windows CD's that came with your computer, and use them to reinstall it. If this was a name brand computer (like dell, or HP), then it will have come with some CD's (usually). Sometimes the restore is built into the old hard drive :-)
If this was a clone computer, you should have a legal copy of windows that was given to you.