20 Most Recent
Questions & Answers
I have a iBM t40 2373 Thinkpad when i turn it on i get 2 codes one is 0176 and the other is 0271
The first code is a tamper alarm indicating that the case has been opened and the second code is complaining about the time and date settings. It may just be that the cmos battery is dead and needs replacing because you will also get a tamper warning if the system thinks the battery has been disconnected. A lithium ion battery is good for about 10 years and this computer came out in 2003. Reboot, go into the setup for the bios, set the correct time and date. If this doesn't do it, you need to replace the battery and then configure date/time.
PC won't run: Fan Error
This is a self test that is checking the fan and finding that it is in error. You might have the fan damaged or else just stuck with dust inside and therefore to protect from over heating the laptop gives you this error.
Please check if the fan actually works when you switch on.
Computer does not turn on
No power or computer does not turn on.
Additional information to why you may be recieving now power from the computer
and/or why the computer
turnning on.Getting into Windows Safe Mode
into Windows 98 / ME safe mode, as the computer
is booting press and ...
safe mode as the computer
is booting into Windows, turn
off your computer
POST troubleshooting steps.
on the computer
and see if it beeps normally. If the computer
has never ...
If you're able to get
to boot with one or more of the sticks.
Good Luck, Please dont for get to Vote/Thank You.
How to take laptop back to factory settings
Depending on the brand and year it was made there may be a factory partition that will restore computer back to factory defaults, if not then a reinstallation of windows will be necessary, If factory partition is available just do a search o Google with your make and model # such as : How to restore an Acer Aspire 7425 to factory defaults using recovery partition
Adjust screen brightness
go to start-->control panel--->display--->adjust brightness
i need to know what operating system you use this will work for only Vista and 7 and 8 and 8.1
Battery of my Acer Aspire 4810T does not work.
There are three possible reasons why your computer is experiencing this power problem. What you need to do is to isolate the component that's causing it.
These are the parts which should be checked:
1. Power supply
3. Motherboard of the laptop.
Here's the procedure that you have to follow:
1. Remove the battery from the computer.
2. Power the computer up with the power cord only without the battery on it.
3. Check if it works perfectly without any problems even if the battery is out. If it works, then, the battery needs to be replaced. (Note: Batteries are disposable parts. They usually die after 2 years of usage depending on how you use it.)
4.If no go even without the battery on it, check the ac adapter or cord if there's a light lit on the box of the cord. If no lights on it, double check the connection. If connections seem ok but no power, then, replace the power cord.
5. If power cord seem fine, check the hole in the computer where you plug in the cord. What you need to check is if there are any sign of damages. Wiggle the cord and see if there are lights lit in the laptop.
I hope this help.
IBM thinkpad ip config wifi, how do i run command
START; at the box type CMD and you will get a black box to come up that is the command prompt.
You can also get there from Start, ALL PROGRAMS, Accessories, Command prompt.
Hope this helps as I do it for feedback not for $$
Not finding what you are looking for?