I receive an error stating :
ACER ORBICAM APPLICATION HAS STOPPED WORKING
A problem caused the program to stop working correctly. windows will close the program notify you if a solution is available. Close Program.
I do not use messenger so it is not due to this being downloaded. There is nothing on the Acer troubleshooting and technical support to help with this.
Thanks!!
My orbicam can't open anymore. When i check instalation, it only says uninstall the program!
My acer orbit cam program was deleted by mistake
Hi Menchy
I have found a great site that gives good details of how to resolve your problem. Go check it out for a step by step resolve on how to remedy the Orbicam problem. It is well documented and has good instructions to follow. Good Luck
http://www.theacerguy.com/2007/06/12/an-apology-and-a-solution-for-the-orbicam-problem/
regards
Graeme
Hi again, I strongly suggest following the instructions in the link offered. The solution offered there is the outcome of more than 190 posts regarding your exact problem. Try the 2 procedures detailed first, if no luck, follow the given instructions on how to gather information from your machine to then email ACER support for the CORRECT driver to be emailed to you. Good luck
×
Oy..ok..go to www.acer.com and get the driver set again, then re install that, and then choose that camera, from control panel.
got backup for your Acer?
here's an option for that driver, including a scan for the system issues.
http://driverzone.com/device.php?id=2394
can you 'see' the cam in your control panel settings?
×
Try performing uninstall from control panel, even if the program is corrupted. Then install it again using the recovery disk or downloading it.
hope it can help
cheers
here is the link to acer download page:
http://www.acerpanam.com/flex/acerdriver...
×
165 views
Usually answered in minutes!
I download the driver but still unable to use my laptop orbit camera
×