Software i need a software i don have the software soi couldn't connect my webcam please help to download the software my computer is dell and it is windowsxp please do me the needful

Hi,
Have you tried the Dell website?

you need to reinstall the driver.To Find latest update for the driver,
you can download 3DP Chip v11.12 from Mediafire
Open it,and you will found Your driver like Example on the screenshoot,and Click it,you will Redirect to the Driver you've need.
Please don't forget to rate it if this helpfull.

Maybe the Webcam software from Dell is not set up. Here is a link to download it:
http://ftp.us.dell.com/app/DellWebcamSW.exe

Hi bryno2087

LOGITECH C615 WEBCAM SETUP

You don't say which Operating System is installed on your computer or where you loaded or downloaded the drivers for this webcam from. I assume it was from the CD that came with the camera. If you do not have a CD or the CD is defective, you can select your Windows or Mac OSX Operating System (other Operating Systems might not be supported) and download the drivers from the Official Logitech Driver and Downloads Support Website here:

http://www.logitech.com/en-gb/435/8041?section=downloads

For some webcams, it is better to install the drivers and software first and then connect the camera afterwards.

If you have previously installed the drivers and software with the camera connected, disconnect the webcam > uninstall all components of the webcam drivers and software > restart the computer > reinstall the webcam drivers and software > restart the computer > reconnect the webcam > Computer > right click on the camera icon at the bottom of the window (scroll down if necessary)> Send To > Desktop (create shortcut) > double click on the new desktop webcam icon.

I hope this helps.

If this Answer goes some way towards helping to resolve your Query, Problem or Fault, please take the time to Rate it. Doing so helps Solution Providers, like me, better understand the needs and the point of view of Askers, like you, and guides us in exploring the best ways to provide the most comprehensive, useful and high quality Responses and Solutions we can. If you need further help, please do not hesitate to post another Question or add a Comment to this Question.

Thanks for using FixYa.

To install your web cam driver, please follow these steps; Important: Make sure your webcam is disconnected during the software installation.

1. Download and install the driver software.

• IC445C DRIVER DOWNLOAD
• IC455C DRIVER DOWNLOAD

2. Restart your PC.
3. Connect the webcam and following the on-screen instructions.
4. Test your webcam.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi,

Welcome to FixYa!

What type of computer do you have? A Desktop or a Laptop?

If you have a Laptop, please make sure that the webcam is enabled. Some Laptop have a feature to enable/disable the webcam (example: Lenovo [Press Fn+Esc to enable/disable the webcam]).

Try to reinstall the webcam driver using the drivers disc. If you don't have the drivers disc, you can download it from the computer / webcam manufacturer's web site (example: support.dell.com).

Try also to reinstall the cyberlink youcam software using the drivers disc or you can download it from the computer or webcam manufaturer 's website.

Hope that helps. Thank you for using FixYa.

If you still have the motherboard installer CDs, try to uninstall your built-in webcam software. Restart your laptop and then install the webcam software again following the detailed instructions of the installation wizard.

Try using the Webcam Manager. If you are not able to fix the problem using the Webcam Manager that already installed in your Laptop, you need to uninstall it and reinstall again. To do so, try the following.

To install the correct Webcam software, you need to first update the drivers. Go to Control Panel, select “Devise Manager”, choose “Imaging Devices”, double click “Integrated Webcam”, select the “Driver” tab on the top and click on “Update Driver” option. Once you double click on this option, it runs and bring all that devices installed in your laptop. You can see the message “Application already installed in your computer”. In the bottom, you can find a message as “For Reinstalling Dell Webcam Central Software”. Click on this option to reinstall that, you will be required to reboot again. After this, you can find the option “Dell Webcam Central” in your “Start” button. Click this option and wait, it will bring the icon in the right hand side of the system tray screen. That’s it, you can double click on the icon and open it.

Hope this helps.

open your my computer, click on "c" the system will tell you the information is hidden, click on the link and open up the operating system and look in the drivers or there in C and se if you can find you web cam driver, when you find it you might have to force the opening of the driver to install, and once you do that plug your web cam in and see if the system see's it and installs the drivers for the cam, if you installed the driver origanally witht he web cam installed you will have to remove the web cam and unistall the driver and re install it and then plug the web cam back in, and that should help correct the problem.

if ur webcam is not working what u can do is first of all u can uninstall and reinstall the drivers for the webcam and then try ur webcam and still if it doesnt work restart ur computer once and then connect the webcam and try it out and still if it doesnt work then replace the webcam and get a new webcam which is compatible with ur computer.