Logitech QuickCam - Recent Questions, Troubleshooting & Support

0helpful
1answer

Image quality

Hi,

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens.

This will allow you to focus the camera image on objects at different distances.

Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.

Connection Issues:

If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video.

Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed.

Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds.

If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.

Changing Display Adapter Settings:

If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter.

For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher.

To change the color palette please perform the following steps:

Click on "Start," "Settings," and "Control Panel."

Double-click on the Display icon.

Click on the tab labeled Settings.

In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).

Also, check with the manufacturer of the video card for updated video drivers.

Low Light Boost:

If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost."

If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software.

To do this:

Open the QuickCam software.

At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.

Choose "Advanced Camera Settings".

Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.

If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.

Click OK when your are done.

Last, make sure that you ae using the latest drivers.

You can upodate them from here.

http://www.logitech.com/index.cfm/492/&cl=us,en?prodcrid=492

Hope this helps.

Good Luck.

Live, Love, Laugh.
9/18/2021 3:07:02 AM • Logitech... • Answered on Sep 18, 2021
0helpful
4answers

I lost the software CD to my webcam

You have one if the easiest. Go to Logitech Quickcam IM

http://driverscollection.com/?H=QuickCam%20IM&By=Logitech

Right on the first page is software for your operating system. Download it by clicking it and it will start downloading. After that it will ask you to run click run. That's it. The rest it should do by itself.
6/21/2020 8:55:20 AM • Logitech... • Answered on Jun 21, 2020
0helpful
1answer

I need driver software for my logitech webcam m/n:

Logitech website
2/15/2020 2:40:47 AM • Logitech... • Answered on Feb 15, 2020
0helpful
1answer

How to install on a MacIntosh computer

10/20/2019 2:19:00 PM • Logitech... • Answered on Oct 20, 2019
0helpful
1answer

Hi i want to use

The majority of USB webcams are supported automatically under the UVC webcam driver, which should already be included. Just plug it in and try it! If you are still having trouble, I'll need to know what distribution you're using, and exactly what, if anything is happening.
9/10/2019 6:05:19 PM • Logitech... • Answered on Sep 10, 2019
0helpful
1answer

Need driver for Logitech V-ub2 Webcam

1st You download Webcam Driver.driver for LogitechAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
9/10/2019 3:53:36 AM • Logitech... • Answered on Sep 10, 2019
0helpful
2answers

Logitech 8k89 n231 windows 7 driver 4.3.2 free download

Hi go to this site: Driver Update Software for XP Vista 7 8 for every driver related problem. enjoy
8/23/2019 9:25:55 PM • Logitech... • Answered on Aug 23, 2019
0helpful
2answers

I need the driver for my qc passed webcam

Visit this site to download your needed driver for logitech webcam. http://www.logitech.com/en-us/support-downloads
7/24/2019 12:38:32 PM • Logitech... • Answered on Jul 24, 2019
0helpful
11answers

Can't get webcam to work with AIM, why?

THE REAL SOLUTION!!!!

You probably have multiple video cameras and AIM has defaulted the wrong one

on AIM:
1. go to edit
2. settings
3. enhanced im
4. audio & video
5. camera
6. choose something other than default
7. apply
8. repeat 1-7 until the image appears

do NOT click on video under innivations

6/27/2019 8:47:40 AM • Logitech... • Answered on Jun 27, 2019
0helpful
2answers
0helpful
1answer

Logitech quickcam V-UM14 on Windows

i need driver to installation i have a cam drivers i need thanks from michael poblete
5/7/2019 3:58:06 PM • Logitech... • Answered on May 07, 2019
0helpful
1answer

I want to download this precison lens f2.4

Hi... I want to download this precison lens f2.4
4/28/2019 9:09:19 AM • Logitech... • Answered on Apr 28, 2019
0helpful
3answers

Need a free download driver for a logitech precision lens f2.4

Hi
please go to logitech.com find your webcam from their list and download the driver for it.
let me know if you need more assistanse.
thanks :marco
4/28/2019 9:06:49 AM • Logitech... • Answered on Apr 28, 2019
0helpful
1answer
0helpful
8answers

Intex IT-1301WC webcam drivers

driver web cam intex IT-1301wc
7/28/2018 10:15:42 AM • Logitech... • Answered on Jul 28, 2018
0helpful
1answer

ERROR on Quick Cam

try reinstalling the video effects software
6/18/2018 1:17:53 PM • Logitech... • Answered on Jun 18, 2018
0helpful
12answers

Logitech 8k89 i t e camera driver

Logitech 8k89 i t e camera driver;;; sir send me sam webcame driver please thanku very much
6/15/2018 7:30:42 AM • Logitech... • Answered on Jun 15, 2018
0helpful
1answer

Can't install a logitec quickcam E 2500 on my mac

The Quick Cam line ever had drivers for Mac OS versions. See the specifications here: http://support.logitech.com/en_us/product/quickcam-connect-product/specs . The E2500 works with Windows XP and Vista. You may be able to use the camera in Boot Camp running one of these versions of Windows. The Quick Cam E2500 doesn't work with Windows 7 and newer Windows OS versions. The Logitech Webcams, including the C525 and the C920, will work with a Mac directly. I wish that I had better news for you. Cindy Wells
5/13/2018 10:48:45 PM • Logitech... • Answered on May 13, 2018
0helpful
1answer

Logitech quickcam messenger v-um14

v-um14

5/12/2018 7:20:48 AM • Logitech... • Answered on May 12, 2018
Not finding what you are looking for?

6,050 questions posted

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mehandi Husain ...

Level 3 Expert

1426 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Logitech Computers & Internet

  • Forum

View Most Popular

  • Logitech Computers & Internet
Loading...