Password for belkin router

If you are asking what the default credentials are to log into the admin panel of the router, then the options are below.

Default usernames: admin, Admin, [blank]
Default passwords: admin, password, [blank]

If you are asking for the Wi-Fi password, that is unique to the user who initially set it up. You can reset the router but following the manufacturer instructions and holding the reset button down in the back. This will erase all settings on the router.

There is a small piece of paper underneath the router with original passwords, and the default was WPA security.
Hold the reset in the back till it cycles to remove any custom settings.

1. Click on the green Belkin Router Manager icon (right-click for Windows) to open the menu, or type 192.168.2.1 into a web browser.
2. On the Belkin Router Manager menu, scroll up to Router Settings and highlight.
3. Click to open the Belkin Router Setup page on your Web browser.
   

You must log in with a password to make changes to your Router's settings. If you have not yet set a custom up a password, leave this field blank and click the "Submit" button.

go to this website

http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D7235uk4&aid=7063&scid=282

and download setup cd you will need it to setup the router properly

You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.15.1
or
http://192.168.2.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Clickon wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Go to your router thru your browser just like a real web site. (my Belkin is: http://192.168.2.1/index.html) From there log in. Default password is blank/no password. After logging in you will find the area to create passwords.

The key is for the security placed on the device. By default, routers do not come secure - you set your own key (or password) on the device when you set it up.

You will need to go to your router setup screen using your computer, go to the wireless section, and view the key you have set up for the router. Then head to your XBOX and enter the information where requested. If you still have your manual and operating instructions for the router, it will give you the specific address you need to enter in order to get to the router setup screen.

s u can login to ur belkin router like connect a pc through hard wired >and login to router screen>and go to wire less settings>and u can see security under w/l> go to there>and select WEP and under phaseprace type any 10 digit no as password which u can easyly remember one>and save it>and reboot the laptop>and login to ur w/l n/w and it will ask for password>rate me if its help full thx...