20 Most Recent Belkin Surf N300 Wireless N Router Questions & Answers

Power it up and use an ethernet cable to connect to the router. Then you should be able to login to the router UI to set up your preferences.

Belkin Surf N300... | Answered on Dec 19, 2018

slow speed on Belkin router. Don't warry just follow these steps:-
1. ("Start > Run", type ncpa.cpl and click OK) and double-click the entry for the Local Area Connection or Wireless Connection. it displays Status - what "Speed" does that show?
2. Use your computer and also update your Belkin router firmware.
for more steps visit:-

Belkin Surf N300... | Answered on Dec 05, 2018

Is the router showing you the correct network when you view the available wireless networks?

Belkin Surf N300... | Answered on Nov 04, 2017


Belkin Surf N300... | Answered on Jun 02, 2017

When the "wireless adapter" was installed in your laptop, a so-called wireless manager similar with the wireless zero configuration of winxp was installed as well.And the news is, everytime you boot up your system, it will automatically enable the wireless manager that was installed with the adapter. That's why you have to go to services.msc all the time so that you can use the wireless zero configuration.

you need to troubleshoot the adapter ..and restart your pc..

**If you need any kind of technical assistance you can contact support cell at here

Belkin Surf N300... | Answered on Apr 03, 2017

There is a small piece of paper underneath the router with original passwords, and the default was WPA security.
Hold the reset in the back till it cycles to remove any custom settings.

Belkin Surf N300... | Answered on Dec 20, 2016

when the power restores the settings should work automatically.

Belkin Surf N300... | Answered on Oct 02, 2016

The Wii console's internet connection settings are not correct. This could include your network name (SSID), WEP or WPA keys, or any manual settings you may have entered.
It's possible something has changed since you last connected online with your Wii console. Try setting up a new connection file, using your router's settings.
While "Search for an Access Point" is the easiest and recommended connection type, your network may require you to use the "Manual Setup" option.
If the problem persists, try our general troubleshooting for tips.
If you are still getting this error code, please call 1-800-255-3700 for further assistance.

For more help visit cbrtechsolutions

Belkin Surf N300... | Answered on Nov 05, 2015

read this http://www.belkin.com/networking/manual/MAN_F7D6301_v1_8820-00697_Surf_N300_N_Router.pdf
If you have forgotten your personal router login password there is no way to recover it. You will have to reset the router. This means all the settings on the router will be reset to factory defaults. It also means that all your connected devices will need to be connected again with the new security information (WEP, WAP, etc,) . You will need the default admin login name and the default admin password. This can be found in the user guide that came with the router. This can usually be found online at the router manufacturers site.
There is usually a button or a switch hidden in a pinhole opening on the back of the router. Pressing and holding the switch for 10 seconds or so will cause the reset and usually the LEDs will flash and blink for several seconds as the router firmware resets and clears out the old information.
If you are trying to get into someone else's router illegally there is no way to find out their login password.
For future reference, write the password down, or a hint at what the password is, on a piece of tape and secure it on the bottom of the router. I use my cell phone memo function to store all my passwords.

Belkin Surf N300... | Answered on Apr 24, 2015

Hi Norman,
For guest access:
You can allow guests to use your Internet connection without joining your personal network.
The network name and password for the guest network is located on the network information card found under the foot of your Router
A person using your guest network will be able to join without a password, but will be shown a login page when they attempt to surf the Web..
They will need to enter the guest password into this page to continue.
Hope this helps!
Please Rate if it did!

Belkin Surf N300... | Answered on Feb 08, 2015

You would need to refer to your Belkin's instruction manual for how to set up WiFi on it. The password for any WiFi hot spot is unique to that hot spot so there is no general 'guest' password per se - it depends on how you setup the WiFi router.

WiFi routers also have a web-based interface where you can open a browser from a connected PC and manage the device. Again, the device's instruction manual will tell you how to do this.

If the router was supplied by your internet service provider you should be able to call them for help.

Belkin Surf N300... | Answered on Jan 27, 2015

Not finding what you are looking for?
Belkin Surf N300 Wireless N Router Logo

137 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts


Level 3 Expert

4369 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

setup belkin n300 router without cd

  • Computers & Internet