Frigidaire GLTF2940ES About 3 yr old Frigidaire GLTF2940ES was working fine. Then last load did not spin out. Took out that load, put in new load Now all lights on front panel work ok, but it when push start button in lets water in for say 5 secs, waits a min lets water in for 5 secs every minute as timer counts down. Put it on drain/spin, it pumps for 5 secs every minute or so as it counts down. Never does spin. Any suggestions? Thanks, Dan

will not spin and shows an error 30 what could be the problem? will not spin and shows an error 30 what could be the problem?

washer comes on and you can select what options you want. but when the start button is pressed it locks the lid, it sends in just a cupful or two of water and stops. the timer will jump up and down 3 or four minutes lets say from 45 and it will count down to 42 and then back to 45 again within about 10 minutes. It failed half way thru the last time it acutely ran and had what looked like a "F" code blinking on the timer. washer comes on and you can select what options you want. but when the start button is pressed it locks the lid, it sends in just a cupful or two of water and stops. the timer will jump up and down 3 or four minutes lets say from 45 and it will count down to 42 and then back to 45 again within about 10 minutes. It failed half way thru the last time it acutely ran and had what looked like a "F" code blinking on the timer.