My front load Kenmore washer 44082 does not start. just buzzes and displays ERR.

I have never ever seen a 'DO' code. All washing machine codes are E and 2 numbers, except for 'LOC' for 'Lock'..

https://www.searspartsdirect.com/diy/error-codes/washer-repair/1234598/kenmore-417-model-front-load-washer/0582

Try disconnecting from the mains supply for 15 minutes.

https://www.google.com/search?q=Kenmore+model+44082+error+code+%22do%22

..

with machine disconnected.at the top is a flat wooden paneland at the rear of machine is two little screws one at each side remove this will expose the top of machineif no belt is visable then its broke and lying at the bottom of machine,as for the pump this sits at the bottom of the drum ,you dont tell me your problem,so,i dont know how to help you.adrianxxx

LOC means it thinks the control panel is locked.
This gives the ERR indication when you push the buttons.
To unlock it you need to hold down the Options and Select buttons together until it reacts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
%^$@

LOC stands for lock....door lock failure....check the door strike and make sure door is closed....if closed wil need to replace lock mechanism

what is the error code

Remove hoses from fill valve, clean screens inside fill valve, if this does not fix problem, replace valve.

e23 is not a valid code.
Please re-check and post if you still need help.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Do you still have your owner's manual that came with the Kenmore washer? Look under troubleshooting your Kenmore washer.

un plug the washer for 5 minutes and re try

Press "stop" & "cancel" together for over 10 seconds to clear the display; and continue your..........

And rate me pl.......