One of the usb devices attached to this computer has malfuntioned and windows does not recognize it

Re-install your printer software completely... after that you may ready to use... thanks

For some reason, your USB cam is dead. It has nothing to do with your computer, what you can check by connecting it to some other PC

One of the USB devices attach to this computer has malfunction, and windows does not recognize it

Have you installed the phone's software called the PC Suite? If not, you need to install it so that your computer can recognize your device. The cd is with the phone on the box.

Try re-installing the motherboard drivers. Here's a link:

http://drivers.softpedia.com/get/BIOS/Asus/Asus-M2V-MX-SE-Bios-0502.shtml


Hope this helps

Chris (ziraffa)

try connecting it direct without the cradle... if you still get the same thing then the usb cable needs replacing

i need the windows xp driver

Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

try to connect the usb of your printer at the back usb ports of your CPU. and try to scan your device.
or
Do as follows inst.
Unplug your printer usb on your system. then attach it back to your computer then power on your printer.

Do right click my computer>properties> in system properties select hardware> then, click the Device Manager> tab, then select your device on PORTS. then click the scan for hardware changes> to scan your device. this icon can be found above or click Action menu and select >scan for hardware changes.

then restart PC. Hope you can do it. And it will help you.
thanks.

this just seems to happen. it could be the USB, but most of the time it just seems to be one of the problems sandisks get.
sometimes mine doesn't turn on, just leave it for a minute and come back.