As stated in your response to another person (Hitachi 43UWX10B)

You have all the resistor are correct! Yes I can Tell you exactly what you need to know and How to Save settings after you adjust convergence, I have to pull out my manual on your hand unit Be right back. first you need to go to front of TV remove front bottom panel to where you can see the front of chassis on the board you replaced ICs there is a small blue contact button with TV on press and hold for 5secs Convergence Pattern should appear! You will need your hand unit to begin to adjust convergences.

I would guess you missed a open resistor--there are only about 12 of them--how did you check them?

This set (43uwx10b) has a tiny blue micro switch on the front of the chassis---if you engage it from the front the set will go into the DECAM or convergence mode--let me know the CLU number on your original remote and I will scan and paste instructions---98% of the time if the set is wacked out and will not adjust one of the resistors is gone---ONE OF THE CHIPS GETS THEM.

SD TECH

2.2 Ohm 1Watt

All the values and resistors are part of the Hitachi kits on www.TvRepairKits.com

You need to call a tv repair person.The set needs new convergence ic's an updated resistors.This is a common failure and they have a update kit to help increase performance.

RK46 is a 1.8 ohm 1watt metal film 5% tolerance resistor

Good Day;
If you order KIT 10 from B&D ENTERPRISES at 1-800-458-6053 The KIT will include all parts neede and layout of part value & locations on simple paper lay out diagram.

Good Luck, big IRISH.

Check the area for pico fuses and make sure that they are good. Also, thre may be small valued resistors as current limiting resistors in that area rather than the pico-fuses. Check for those too.
Dan

Rk58 is 3.9 ohm

Hi, which ones do you need the values for? e-mail me and I`ll give you them, you`d probably bebetter off to order the kits with the new stk`s and all resistors included, you can get those from your distributor if they sell Hitachi, if not get them at Tritronics, let me know which ones you need, BMW Rider