Question about Hitachi 60EX01B 60" Rear Projection Television
How to correct the red shadowing on the right side of picture
An expert who has achieved level 3 by getting 1000 points
First thing to try is a convergence but with the red shadowing seems to me that you may have your color gun going. Convergence can be found in your video menu on your setup screen. Once in the menu you can adjust the colors to line up. This usually has to be done on a tv that has been moved.
Posted on Nov 12, 2012
thanks for the advice, unfortunately, the back of the set was removed to see if there is a way of adjusting the lamps & some coolant fluid was lost, any idea how to repair that or how to get more coolant fluid added, or is that something that is included with a replacement lamp? I really appreciate any help as there is still a picture, but it is worse now after that happened. Thanks, appreciate any advice.
×
You have to replace the convergenca amps, stk 392-110. these are obsolete, replace with stk 392-180. More robust current handling capability. the fusible resistors, 2.2 and 3.3, 1.5 ohm yoke return have got to be replaced also.
Posted on Dec 08, 2012
SOURCE: color shadows
PVAT!Check for evidence of coolant leak on pcb's, If none found,replace convergence IC's,then align convergence in servicer mode.Check service literature for procedure.
Posted on Sep 28, 2007
SOURCE: Blurry on left side of the screen. Shadowing in different colors.
Try this website. It is the Hitachi support website. http://www.hitachi.com/GlobalSupport/ContactUs?form_type=global_support Hope this helps :)
Posted on Jan 28, 2008
SOURCE: Hitachi hdtv model 43uwx10b is showing a green shadow on the left side of the pictures
Good Day;
If you order KIT 10 from B&D ENTERPRISES at 1-800-458-6053 The KIT will include all parts neede and layout of part value & locations on simple paper lay out diagram.
Good Luck, big IRISH.
Posted on Sep 06, 2008
SOURCE: shadowing and blurriness
needs a convergence board repair, not too hard to fix if you are handy with a soldering iron.
get the 2 convergence chips for this model @ partsstore.com
Posted on Mar 21, 2009
SOURCE: colors run; curvature to picture
Your convergence is bad and needs fixed. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, how to fix it and where to get the parts.
Let me know if you need more help.
Thanks for using FixYa and for the generous rating.
hardrocko
Posted on May 12, 2010
15,025 views
Usually answered in minutes!
×