How do you delete all pictures at once on Sony Cybershot DCS-P41? thanks

Follow these steps to delete all pictures from the memory card in your Sony Cybershot camera
Delete All Pictures from Sony Cybershot Step 1 Turn on camera and make sure it is charged.
Step 2 Press the Playback button (confirm that you want to remove all pictures from the memory card)
Please note - at this point, if you hit the delete button the camera will delete one picture at a time. Before I figured out how to delete all pics this was the point where I got upset, thinking that I had to delete 600 pictures...one at a time.

5 megapixels or more. In general, unless you're really tight on space or know you're not going to need the resolution, set your camera to its highest resolution (8 megapixels in your case) and leave it there. You can always make a large picture smaller; you can't make a small picture larger.
See page 13 of the Cyber-shot handbook: http://www.docs.sony.com/release/DSCT70_handbook.pdf

Hello

Ok, here is a link where you can download the manual for this device. Just click on the link below and click in get manual when you are at the site.

http://www.retrevo.com/s/Sony-DSC-P41-Digital-Cameras-review-manual/id/200bh926/t/1-2/

It states very clearly on how to turn on the flash. Hope this can help.

Kind regards
Andrea

Hi there,

That't is normal, try lowering the your camera resolution and it would lower down the size. I just hope your are not yet on the lowest resolution.

Regards,
Jeep Brainy

Power up camera, press Home, Memory management, format, OK
That will delete all pictures on memory stick at once.

First try sqeezing the camera very hard, if that doesn't work slam it as hard as you can in your hand. This usually solves the problem.

when downloading pictures onto pc , tick box that says "delete after importing ? "

You can find the DSC-P41 CyberShot Replacement LCD here.

you can just use the format menu on the setup menu

Either the LCD or the connector/connections are at fault.Check them physically for a loose connection due to humidity or dust. Replace LCD and we can help for original LCD and instructions. mail us further. Siva