How do I connect the SS2624 to HughesNet

not possible to retrieve a password! that's why they are secure... if you have your ISP ADSL setup details you can reset the router to factory default and reprogram it from scratch, or call their help desk BEFORE you do it and ask them to email you the connection details before you start. then WRITE the password on a label and stick it to the router.

You will have to remove from power and, do a HARD Reset of the router. After this you will have to set it up from the beginning again, just like you did when you first got it. Go to your browser and set it up. Also perhaps it may be best to disconnect from Phone jack, plug in the cable from Modem, to router, plug in and power up modem, plug in and power up the router, set up modem, set up router.... from PC.

Hi! There will be a problem with the wireless connection. I suggest before you go to windows 7, check at your router website if there is a new update for the firmware for windows 7.

If that is the case the only thing that you can do here is to reset the router, by pressing the reset button of the router for 15 seconds and then after that it will be back to its default settings.........

There is a reset on the rear panel.
You can download a manual from this WEB site - use this link :-
http://office.manualsonline.com/mdownloads/7868b34e-d8db-c454-5914-3161ac8114c3.pdf

press the small reset button on the back of the unit. It will remove any security settings and allow you to use it

If you have a good IP address, re-boot the router. If your address starts with 169., then you don't have a good IP address.

Try using the following default user name & password:
Username : admin
Password : hagpolm1

christsgirl;

Either get the person you got the router from to give you the pass phrase or try accessing the link on this site to get a manual

http://www.theusermanualsite.com/manuals/mfg/siemens/siemens_bridgerouter_product_list.html

The instructions to reset the router will probably set the entire router back to the factory default configuration. After which you will need to configure any changes required by the ISP into your router.


Dougerus -- you might be able to help Robbyn by telling her what your manual says about resetting the router. In your case are you following the instructions to reset the router completely? CHECK THE MANUAL you may need to hold the reset button for several seconds for a reset. A short push might only reboot and not reset the router.

try www.supportspace.com

100% free, but 100% qualfied experts to help you.