Siemens Computers & Internet - Recent Questions, Troubleshooting & Support

0helpful
2answers

Roku Customer Service Call 1-8O5-225-669O We are 24 Hour Available Call for Setup-Install-Fix Error

Unfortunately that model of modem does not support assigning DNS.Call 18009218104 option 2. This will get you tech support. Ask for a new modem. They should give you a Netgear 7550 for no extra charge. If they want to send you to another department tell them that there is no need for that and to ask their supervisor how to send up a modem upgrade order. It may take a day or two for you to receive the new modem. Once you have the new modem and it is fully set up you can assign the DNS by followiing these steps.Browse to 192.168.254.254Log in with username: admin and the password you set when configuring the modem (If the modem is configured by Frontier then the password will be also be admin like the username.)Click My Connected Home at the topClick Network Connections on the leftClick the Action button next to Broadband Connection (DSL)Under the VCs sections Click the edit button to the right of where it says PPPoE or PPPoA.Here you will find a spot for DNS Primary and for DNS SecondaryEnter the numbers given to you by Roku in these to spots.Click Apply.And you are done.If you have any issues with following these steps just call 18009218104 Option 2. This will get you Frontier tech support. Ask them to show you were to assign DNS servers for the PPPoE connection in the modem's firmware. They will guide you through it. If they claim they cant help you with that it probably just means they dont know how. There are definitely people there who do know how and can help you further. Tell them to ask someone else there.If you have any additional questions for me please feel free to ask by replying here.Please note that all information here considering Frontier's modem replacement policy assumes that you are not behind on your bill or have a payment plan and could change at any time. The information I have given is based on what the policy in place as of 5-7-2013 at 10:19pm Central Time
11/18/2019 11:49:01 AM • Siemens Gigaset... • Answered on Nov 18, 2019
0helpful
2answers

Firewall

If you are referring to your connections built in firewall then goto network connections and right click on the item and select properties. If there is a built in firewall to the network device you will see it in the list. Uncheck the box to disable it.
7/19/2019 12:02:07 PM • Siemens Se5954... • Answered on Jul 19, 2019
0helpful
1answer

I have a Siemens Simatic op17 . I do not have the Password . Is there someway I can overwrite or change it ?

You must factory restor siemens simatic to remove password. Or flash it will custom rom as per your siemens model.
6/10/2019 9:28:03 AM • Siemens... • Answered on Jun 10, 2019
0helpful
2answers

How can wifi password changing

connect to your wireless modem via an Ethernet cable for best result. open internet explorer on your computer. type 192.168.1.1 (or 192.168.254.254) you will be asked to enter username and password. username:- administrator Password :- admin (if nobody change previously) then after successful login, go to wireless settings, may be there is a separate tab named "security" under wireless settings. or else find out which is the area with "encryption" there you could see existing password, just change with 10 characters. save it. you have done. it is recommended to go to reboot tab and to click ok for rebooting your modem. other wise just power off and switch on again after 5 seconds.
3/13/2019 5:44:15 AM • Siemens... • Answered on Mar 13, 2019
0helpful
1answer

Service Manuel OP 10 E

Look on u tube they might have one
1/21/2019 4:57:32 PM • Siemens... • Answered on Jan 21, 2019
0helpful
2answers

I cannt play wolrd of warcraft online but i go and check my and things like that

http://www.portforward.com/english/routers/port_forwarding/Siemens/Speedstream-5450/World_of_Warcraft.htm should be close enough to get you started (they don't have pictures for the 4200). Check the link for the downloader too - you'll need those ports forwarded if you want to download upgrades. (And you probably can't get both the desktop and the laptop playing at the same time - a port can only be forwarded to one computer at a time.)
11/26/2018 6:50:37 AM • Siemens... • Answered on Nov 26, 2018
0answers
0helpful
1answer

In Siemens Simatics HMI PT700 Ethernet port is not working( cable changed) booting not taking place. What could be the reason

Hi, If the system is not booting then ethernet will never work. Ensure that you are getting the correct power to the system. Check the power unit first then reset the motherboard inside.
6/25/2018 5:04:35 PM • Siemens... • Answered on Jun 25, 2018
Not finding what you are looking for?
Siemens Logo

1,207 questions posted

Ask a Question

Usually answered in minutes!

Top Siemens Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Prashant M
Prashant M

Level 3 Expert

2278 Answers

Cindy Wells

Level 3 Expert

6395 Answers

Are you a Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...