I have a Siemens Speedstream 4200 Modem and am trying to get the drivers for this, am putting in http://192.168.254.254 in the address field as I was originally instructed to when I first received the modem but I can't seem to access it now. Do you know where I can get the drivers for this modem? I was with a different ISP when I last used this.
Regards, Debbie
OK, we are all not dumb. the question is where are the drivers. Just go to www.hankscomputerservice.com/SpeedStream4200driversxp&vista.zip for both the drivers for XP & VISTA, or get everything ells you want from http://www.thevoipstore.net/speedstream-4200.php
Posted on Feb 18, 2009
Siemens Speedstream 4200 Driver
Posted on Oct 28, 2008
Drivers are available on the manufacturers website:
http://www.siemens.com/index.jsp?sdc_p=lo1272700umc9dnsfp
ISP supplied units sometimes come with customised firmware which blocks port 5060. To remove the block, replace you firmware with a non-customised version.
To configure the modem, type http://192.168.0.1 in the address field.
Posted on Nov 09, 2007
At the bottom of your modem, you can find the drivers...try to use http://192.168.0.1
Posted on Feb 20, 2009
Http://modems.nokiasiemensnetworks.com.au/BridgeMode.htm
you can look for the SpeedStream 4200 driver installer at this link, just look for the for the drivers link at the side of the page...
Posted on Sep 02, 2008
Hi,
You dont need drivers for this modem under vista or XP
.
* Open up your internet explorer, in the address bar type 192.168.0.1
* You can see the configuration page here. In the login page, enter the email address password to go online
Take care
Posted on May 26, 2008
Kujktjjdyujydjtyjhn
Posted on Oct 30, 2008
Steveaug,
You need drivers for this modem if you connect it by USB. Yes, it should be connected by ethernet, but if you don't have the right cable, you can't.
Posted on Aug 26, 2008
Download in http://gigaset.com/br/pt/pages/index.html
Posted on May 30, 2010
Well the site modem support .com.au seems to have some answers for Vista still looking up Win 2000 and XP get back to you when I find anything.
Posted on Dec 08, 2008
53,955 views
Usually answered in minutes!
I had similar problem till I found out the modem only works when its is Bridge Only mode, with PPPoE.
I cannot find the cd that came with modem and i need drivers
would it be possible to use the USB port and the Eithernet port at the same time, Eithernet port is for a desktop and USB port is for a portable, would that work?
i dont have the downloads to get on internet
I can't find drivers for this modem on the siemens website!!!
I need help with a 4200 speedstream
I have installed driver_usb_4200 but cannoy get any modem interface... What is wrong?
Kevin JCJD Symons
[email protected]
I can not connect to my vpn connection
×