I got a brand new GE space-maker stereo cd player with am/fm radio. so my question is where can I get a mounting template and plastic washer so that I can mount this unit. Model # 75292A.

Kylie, if there is a CD tray press the eject button and put CD in tray, push tray in easy to load. If no CD tray insert CD into CD slot and push gently to load. Some have a lid on top that you simply open with your finger then load CD. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Jensen JCR 310 AM FM Stereo Dual Alarm Clock Radio with CD Player
Christmas Presents 2013 RCA RP5605 AM FM CD Clock Radio
Magnavox alarm clock radio CD player
Problems With My GE General Electric 7 4901A CD Player AM FM Clock Radio

Give this place a try.. no promises but I've found a few manuals here:
http://manualsonline.com/

not really repairable none of them are unless the laser itself died byut even then it isn't really repairable the only way would be to find the same type of unit and swap out the good cd player with the bad one but rather than go thru that just buy a new or nice used one no sense rebuilding this junk they really were throw away units it breaks/ you trow it out simple easist cheapest way out...buy another one used and be happy

cd players have their laser fail often. How old is it? A three year run with a player is not bad.

This kind of description defies any sense of the complexity of these devices. It can be anything from a bad solder joint to a defective IC to an antenna connection. I have worked on all kinds of Radios and it is hard to tell what is wrong without looking at the device. I doubt anyone in the world can come up with a one line answer.

hi may I clarify you are asking for a wiring instruction for your new car stereo or you are asking for mounting instruction?if so please give me the brand and model of your new radio and if you can post a picture of the car stereo back connection wiring .so I can help you in wiring connection of it. thank you...

This is a manufacture defect and needs to be returned to the store for exchange.

Replace the CD player. To pull the plastic baffle off the dashboard: Adjust the heating vents so they point downwards. Grab the plastic bar between the heating vents and the stereo. Pull. Remove the screws from the front of the mounting brackets. Pull out the crappy stereo. Unplug the antenna and the wiring harnesses. Transfer the mounting brackets to your new stereo. Cut off the big wiring harness (unless you're lucky enough to have a replacement stereo that accepts the same kind). Connect the wires to the wires on your new stereo's harness. For more info: check the website: http://tomclegg.net/toyotastereo

buy in http://www.metraonline.com/fit.aspx a wire to this car by brand and mounting kit.

You can use any CD changer that has an FM modulater. You would listen to it by tuning in to a station on your tuner.

The sales person at any place that sells car stereos would be able to show you the right type of changer.

If your radio has a cd changer controller built into it, you need to check with the dealership to find out what the OEM changer would be. But a FM modulator will work with any car stereo.

Kenwood, Pioneer, JVC, Clarion, Alpine all sell FM modulator CD changers. I would not personally buy any of the cheaper no name brands. The money you save on the cost is not worth the difference in quality. Panasonic is a very good brand for car stereos but not home stereos, but I don't know if they make CD changers. if they do, that would be a good brand.