MITUTOYO SJ 201 SETTINGS REQUIRED - Mitutoyo Measuring Tools & Sensors

There could be several reasons why the file error is occurring on the PC after downloading readings taken from the Mitutoyo SJ-210 surface tester. One possible reason could be that the file format of the downloaded readings is not compatible with the software installed on the PC. The Mitutoyo SJ-210 surface tester typically saves data in a proprietary format, which may require specific software to open and read the files. If the software is not installed or is outdated, it may result in a file error.

Another possible reason could be that there is a problem with the USB cable or port used to transfer the data from the surface tester to the PC. A faulty cable or port can cause data corruption during transfer, resulting in file errors when attempting to open or read the files.

It is also possible that there is an issue with the surface tester itself, such as a malfunctioning sensor or memory card. In such cases, it may be necessary to troubleshoot or repair the device before attempting to download any further readings.

To resolve this issue, it is recommended to check if the software used to open and read the files is up-to-date and compatible with the file format used by Mitutoyo SJ-210 surface tester. It is also advisable to use a high-quality USB cable and ensure that both ends are securely connected. If these steps do not resolve the issue, it may be necessary to seek technical support from Mitutoyo or a qualified technician.

Might replace the battery?

Check link for use, calibration and manual. Or contact Mitutoyo direct for repair.

https://www.google.com/search?q=RESET+A+SJ-210+SURFACE+TESTER

..

Question edited to add maker.
Question moved from Office Equipment to Mitutoyo.

See the link

https://www.google.com/search?q=RESET+SJ-210+SURFACE+TESTER

probably needs to be recalibrated

Check link for use, calibration and manual. Or contact Mitutoyo direct for repair.

https://www.google.com/search?q=RESET+A+SJ-210+SURFACE+TESTER

..

good day I have a rugosimetro sj 301 and gives me this message I would like to know what printer error 3 means

Hello. Mitutoyo has both calibration and repair services if required.

Repair:

http://www.mitutoyo.com/template2.aspx?id=22

Calibration:

http://www.mitutoyo.com/template2.aspx?id=21

Hope this helps out. Thanks.

Machinist, Inspector, Tool & Die Maker, for A.B.B Raymond Division, 1987-94

You need a Portable Surface Roughness measuring tool. Mitutoyo
is one maker of these. Be prepared for a $$$$$$$$ shock, as these babies aren't cheap!

SJ-201, SJ-301 and SJ-400, are three examples,
1.http://www.directindustry.com/scripts/IDPHeader.php?s=4906&URL=http%3A%2F%2Fwww.mitutoyo.co.jp%2Feng%2Fproducts%2Fkeijyou_hyomen%2Fhyomen_01.html&IDVisite=293213&MotCle=&RefCat=&IDProduit=12095&IDProdSource=&SourceType=Produit
(If the above link doesn't work for you, then try this one,
http://www.directindustry.com/prod/mitutoyo/roughness-tester-4906-30234.html
Scroll down the page, and click on -> Portable Roughness Tester)