At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I am using a canon 4200f and scanning slides and photos for a video project. The quality is great but they are to small for the Final Cut propgram I am using. When viewing the pictures do not fill the frame. Any ideas?
After the first scan through select the zoom in functionality to just scan the area you want to zoom in. That way the scanned image will be much bigger and better quality.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
how much quality do you want and if photo is small to start with and you are scanning it you will need 600 dpi or more where as a larger photo can use less 300 DPi as it is not being enlarged onto the screen / slide show
depends on what you intend storing the pictures on . BMP will take up a lot more memory than jpeg files. The dimension more refers to dots per square inch when scanning a photo .
Just use it to scan the photo and save it to your hard drive rather than try to email it automatically. Then using Mozilla select the saved file to send it.
Did you make changes to the scan type when you scanned the slides? It sounds like you have the scanner set to do a negative image as a slide would need. Check the preferences for the scan type. The scanning manual is available on Canon's Website.
First, try unplugging and re-seating the USB cable in your computer. I am assuming your scanner is not making any noise when you first turn on the computer. If that is not the case, respond back with more information. This is the most common solution to this problem with these scanners though.
go in the computer software like windows photo gallery and scan an image or document.If the settings are corect as you say it should give you the option to aquire image from scanner
Because the slides are see through which means you will need a special add on for the scanner for it to support slides. If you have this already then make sure that it is fitted on properly so no light can get in the compartment where the slides are held during the scan
×