My two cpus with KOB 810e TFSX and PI 945GCM does not display anything but the procs fans are running fine

here you go http://www.mercury-pc.com/product-detail.php?link=p-mainboards&subtitle=Mainboard&productid=57

http://www.driverssoftware.com/drivers.php/kob-810e-tfsx-kob-810e2-tfst-driver/66247 you can download your driver from here

hi
when we face the problem about mother board pi845GLMagp that was a simple solution that
mercury mother board pi845GLM agp drivers free software download as i have lost the cd its urgently then we will feel free

thanks & regard

Here is a link,

• once you have clicked the following link
• look at the bottom of the page
• you will find download drivers button

http://www.mercury-pc.com/product-detail.php?link=p-mainboards&subtitle=Mainboard&productid=743

Thanks :)

Hi,
You can download the required drivers from:
http://www.mercury-pc.com/downloads_list.php?productid=88

Hope this helps. Thank You.

GO TO THIS LINK YOU WILL GET ALL THE DRIVER FILES FOR THAT PARTICULAR MODEL


http://www.mercury-pc.com/downloads_list.php?productid=751

Looking at the manual for this motherboard your maximum ram is 512mb in two sticks of 256mb each. Speed rating is pc133 (maximum). You may struggle with the external hard drive as you only seem to have usb 1.1 and not usb 2.0

Hi

You can download the driver from here
http://members.driverguide.com/driver/detail.php?driverid=358606

or here http://www.xpvistasite.com/kob_810e_tfsx_18456.htm

hi 945gcm motherboard win98se vga driver

Hi

Did you receive a VRM with the the PRC upgrade kit? And have you installed it?

The following items are/should be included in a microprocessor upgrade kit:
• A microprocessor (PRC)
• A heat sink
• Heat-sink retention clip(s)
• A voltage regulator module (VRM),
Your upgrade kit may also include a cooling fan.

If you are adding a secondary microprocessor, examine the VRM to ensure that it is the correct VRM for your system. Install the VRM in the appropriate secondary VRM connector, ensuring that the latches at each end of the connector engage. If you received two VRMs with the upgrade kit, replace the primary VRM already installed in the system with one of the VRMs from the upgrade kit.
Note: The system does not support mismatched VRMs.

Check PE1600sc Microprocessor Upgrade Installation Guide - http://support.dell.com/support/edocs/systems/pe1600sc/multlang/proc/9D904A05.pdf

Let me know how you get on

Mike