How do i connect a kenmore ultra wash II portable dishwasher to kitchen sink, the attachement on the hose attached to the dishwasher it to big around to fit my facuet

Drain hoses are a pretty standard spare part.

https://www.google.com/search?q=portable+washer+drain+hose+replacement

..

I think that the valve assembly in the end of your attachment hose is having problems, check with Kenmore and see if a replacement one is available and if your dishwasher is new enough perhaps it might be under warranty?

no drano but a lot of tomes the drain hose under the sink where it drain into the garbage disposal needs to be looped up when you use the sink where the disposal is it drains back down into your dishwasher

Hi, I found this video on You Tube, regardless of manufacturer, the procedure is the same. Click on the link below. GE WD24X10066 UNICOUPLE ASM PartSelect

the adapter i got with my new kenmore dishwasher does not fit with my kolher fauset. The sears serviceman said i need a longer adapter. I can't find one anywhere.

repairclinic.com, appliance411.com, or ebay.

I have a Kenmore Quietguard portable that won't stay connected to my kitchen sink faucet. Checked all I can and continues to spray the wall and me without staying attached securely to the faucet adapter. Help!! Any ideas?

if it looks somewhat like a elongated and cropped figure 8 it is what we around here call a clutch drive. if it looks like a 6 point star, it is a torx drive.. Be aware, the screws holding the guard in place may also be holding the pump in place under the unit. if so removing the screws would allow the pump to fall off the bottom of the unit.

If the unit washes, the motor and pump are working (the same motor/pump that washes the dishes also drains the unit)

if the motor is not running during the drain cycle, it is most likely the timer or a connection to the timer

if the unit is not running at all, it could be the motor or timer

if the motor/pump is working, I would first ensure the drain line is not clogged (pump may be trying to drain the unit and forcing the water out were ever it can due to a blocked drain hose, this would explain the water on the floor. I have found that when a drain line is blocked, it is usually blocked where the drain hose connects to the drain pipe under the sink.

let me know what you find and we will Fix Ya.

clarkco

if it is on the hose then it should be a check valve.

You have a restricted drain in your sink, not the dishwasher. Water is unable to go down drain fast enough and is backing up.