My Samsung AIO computer is not ejecting a CD - Samsung Computers & Internet

You can find the eject icon (up arrow with line underneath) on the far-left of the area atop the CD/DVD slot where the playback controls and power button are found. You can also eject the disc by left-clicking Start > Computer > right-clicking CD Drive > left-clicking Eject.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_e0539de310ea5ad7

You can find the eject icon (up arrow with line underneath) on the far-left of the area atop the CD/DVD slot where the playback controls and power button are found. You can also eject the disc by left-clicking Start > Computer > right-clicking CD Drive > left-clicking Eject.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_e0539de310ea5ad7

Please tell us the exact model of OKI-DATA printer so we can assist you further.

Hello,

You can eject it by going to computer. Then look for the cd drive letter. Right click on it and look for eject.

David

There are two ways toopen the CD drive door if the button just below the drive tray does not work.
Go to My Computer and right click on the drive and click on Eject.
If this does not work then you can manually open the CD drive tray by -
Straighten a paper clip and gently insert it into a tiny hole below the drivetray next to the Eject button. Push the paper clip gently until the drive traypops out, then pull the tray until it is fully out, then you can remove the CDdisc.
If you continue having problem opening with the Eject button, then the CD driveis faulty and needs replacing.

1. Turn off the power to the computer.
2. Insert a steel rod (about 1.3 mm in diameter) into the emergency eject hole and push hard. (A stiff paper clip may be used).
3. The disc tray is ejected a short distance. Pull it all the way open by hand.

there is a tiny hole in the from of your CD player, take a paper clip and push it into the hole and the cd tray will eject.
the disk may be off track not allowing it to open.

you can also go to My Computer and right click on the drive and eject

1. right click on the drive. 2. press 'Eject' option. this will intern send the software interrupt to the drive to open it, if your cd-drive 'button' is not working. thanks.

hit the top of it be careful this worked for me

Seems to be a hardware failure, last thing to try before throwing it out, is right click on my computer>properties>Hardware Tab>Device manager Tab. Next click the '+' sign on DVD/CDROM Drives, highlight your DVD RW and right click then uninstal. Re-boot your pc and let windows find and re install your drive. This should sort it; if not it's down to using a pin in the tiny hole at front of drive to eject manually. Your Ratings are important