HI WHAT FUNCTIONS DOES THE JANOME JFS 1817 COME WITH. CAN I DO BUTTON HOLES ETC

Internet or this site

im loking for u hi and low

http://content.janome.com/userfiles/file/Inst%20Book%207318%20%28English%29.pdf See p. 22 You snap off whatever foot is currently on, and snap on the buttonhole foot, #J.

go to the website of a1sewingmachines.com and call them
about a manual

you thread it the same as for a single needle
only you add one more spool of thread & thread thru the same
thread guides as the first needle & then thread the second needle
with the thread from the second spool,
also you have to have a spool holder for the second spool

Hi
I can usually find manuals on Janome no problem but I can't access the one for Hello Kitty.
If you click on the specifications for any machine on the Janome site a PDF appears with a download manual button next to it. I can see the PDF but no download manual button.
http://www.janome.com/index.cfm/Machines/Sewing-Quilting/Hello_Kitty
This machine does look similar and I could get the link for a free manual, hope this helps. If not contact Janome.
http://www.janome.com/documents/File/ManualFile/3128.pdf
Try ebay for a power cord. A Janome cord should fit more than one machine. Just check the connection pins etc match.

Hi,

You can download the user manual by clicking this link.

For additional details and specifications, click here

• You'll require Adobe PDF Reader installed on your computer to view this manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

I have been working on this for the last 2 hours myself....Can't get past step one!

Tried all button hole functions too...even pulled out the book....no luck yet.

Kim

It sounds as though you are using the Memory button hole setting which sews the BH forward on one side(leg of the button hole ) and backward on the other side. You have button holes on Numbers 11-16. I think #16 is the one you are trying to use but the others are easier. Put the button in the special foot, pull the BH lever down( It is located on the left side of the machine towards the rear of the machine ).Select #11 and the machine should sew both legs in the same direction. This machine has always made great button holes.
sewman7