How to turn off red blinking light

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Hello

Have you tried taking the battery out and putting it back in? It may free it up. On the other hand, I have a corded phone that blinks when there is a new call with caller id. If I don't scroll down to every call, it continues blinking. If you have caller id, just scroll down a little more and see if the blinking stops.

hold the page button down for 5 seconds, that usually clears the blinking beep/light!!!

also make sure no old messages are in the VM inbox!

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Have you checked your voice messages?
My uniden has a red light that flashes when i have voicemail i havent picked up

Hello,
Usually when you listen to all your messages (no new ones) the blinking stops automatically.
Hope it helps.

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

The light in the upper left indicates you new messages. The light will flash until you clear all messages.

To reset the indicator(Red light flashing on handset), press and hold the find handset key for 5 seconds or until the light flashing stops(10 sec).

Here are sample paragraphs from the user manual : hope it helps !

The new message LED on the handset flashes when you have new messages in your
answering system. The LED stops flashing when all new messages are played back.

3) To delete all messages, press delete messege in standby mode. Press delete
messege again after the announcement "To delete all messages, press delete
again."
When you try to delete all messages without first listening to your new messages,
you hear several short beeps followed by an announcement "Please playback all
messages." This protects you from accidentally erasing messages you have not yet
reviewed.
Important:
When you press delete messege, you are permanently deleting the message. Once
deleted, the message cannot be replayed or retrieved.