I have just purchased an LSS-505 machine and I have not been able to get sewing yet. The bobbin thread tangles after about 3 stitches. I have done all the troubleshooting that I know to do, changed n

Question edited for a lot more clarity.

Here is the manual

Michley LSS 505 series Instruction Manual

ManualsLib https://www.manualslib.com > ... > Sewing Machine

View and Download Michley LSS 505 series instruction manual online. mini multi-purpose sewing machine. LSS 505 series sewing machine pdf manual download.

The accessories came with it. They are availabe on eBay

michley lss-505 for sale eBay
https://www.ebay.ca > sch Brand New Michley Lil Sew & Sew LSS 505+ Sewing Machine and Accessories. Brand New. C $54.50. Buy It Now. from United States. Sponsored. Lil' Sew & Sew by ...

How to get the Thread from the Bobbin Case ' Portable ...

? 3:55
https://www.youtube.com/watch?v=IDQwjVDWwVI
Sep 3, 2013 - Uploaded by Gen-zelTV
How to get the Thread from the Bobbin Case ' Portable Sewing Machine .... did what was told, but my machine ...

LSS-505 sewing machine trouble shooting - YouTube

? 2:53
https://www.youtube.com/watch?v=8RtOXAtheyo
Apr 25, 2012 - Uploaded by tivaxTV
Just take out the bobbin holder and replace it back. ... How toget the Thread from the Bobbin Case ...

How to Troubleshoot Bobbin Problems ' Sewing Machine ...

? 3:12
https://www.youtube.com/watch?v=1tgrAlQdX78
Sep 7, 2013 - Uploaded by Howcast
I'm just going to remove this case and get into our bobbin area. ... You'll take everything out, make sure ...

Basic Tips for All

1. Always turn the handwheel TOWARDS you (counter clockwise) as turning it in the opposite direction (away from you, clockwise) may knock the timing out requiring repair from a service center.
2. Always be sure your presser foot is in the DOWN position before sewing. Sewing with the presser foot in the up position will cause your thread to tangle and your bobbin to jam.
3. Change needles regularly (after 16 hours of use) as dull/weak needles can cause damage to your machine and fabric. Only use SINGER needles on your SINGER sewing machine.
4. Always be sure you are using the correct bobbin for your machine. Class 66, Class 15 and Class 15J bobbins look very similar. However, using the incorrect bobbin class in your machine can cause damage.

How do I thread my 3/4 thread serger? (14SH654, 14ET754, 14SH764, 14CG754)
Q.
How do I thread my 2/3/4/5 thread serger? (14T967, 14T968, 14T957)
Why is my electronic machine beeping? Why won't my machine sew? Why will my machine start to sew then stop?
Q.
How do I sew denim and heavy fabrics?
Q.
Why is my bobbin not winding evenly?
Q.
Why won't my machine pick up the bobbin thread?
Q.
Why is my machine skipping stitches?
Q.
Why is the thread looping/bunching under my fabric?
Q.
Why is the thread looping/bunching on top of my fabric?
Q.
Why doesn't my stitch pattern match what is on my machine?
Q.
How often should I oil my machine?
Q.
What types of thread should I use?
Q.
I can't see the take-up lever? v

Hai, Please check the bobbin tension and winding. And cleaning the machine.

Hi. You "feel" that the machine is threaded correctly? You should probably completely pull the thread out and start over, making certain that it is threaded correctly. Once that is done, double check to make sure the thread is pulled all the way into the tension discs. Make sure also that you have lowered the presser foot. Is the bobbin inserted in it's case correctly? Every aspect is critical to proper function. You may also want to revue your manual.

http://userguides.50webs.com/

This site carries manuals from every Hyundai model of sewing machine
ever made.

Get out the manual and refer to the maintenance section for cleaning the machine.

Especially the bobbin area. You want to make sure the area around the bobbin case is free of lint and thread.

Use a new bobbin and re-thread the machine, with the presser foot UP.

Install a new needle, again according to the directions in the manual. Installed incorrectly can lead to mis-stitching.

If the problem persits, the timing may need adjusting.

This should be done by the sewing machine tech for Kenmore.

Sewusa.com has a guide for this in the repair section, but you could end up with more problems.

Hello,
Here are a couple of things to try.

* Un-thread your machine and remove your bobbin. Clean any loose thread or lint out of your
bobbin case. Re-thread your machine, reinsert and re-thread your bobbin.

* Change your bobbin
There could be a nick along the edge of your bobbin spool that’s catching your thread as you
sew.

* When you start to sew a seam, grasp the upper and bobbin thread tails. Hold them back
and out of the way as you sew your first couple of stitches. This will keep them from getting
caught in your machine.

I hope this helps.

To address my needle thread tangling (horribly) in the bobbin compartment, I rethreaded the bobbin. I cleaned the bobbin and the feeder feet, I changed the bobbin and the thread. I changed the tension on the needle thread and the bobbin thread. NO FIX! Then, I changed the needle - the problem was fixed instantly. I sewed awhile and then put the original needle back in. No problem. I think perhaps that the problem is being caused by the needle getting out of alignment somehow during sewing. If you are having the same issue, try it. It can't hurt!

This was happening to me too, I reversed the bobbin feeds and it has not tangled since then. I was orignally feeding the bobbin from the left side and now i feed the thread from the right. It works great this way.