Need charger power cord 450 jump start - JUMP START SYSTEM

Here are the steps to replace the charger for the Power On Board 450 amp VECO12POB jump starter:

1. Unplug the charger from the electrical outlet and remove it from the jump starter.
2. Locate the charging port on the jump starter and remove the cover.
3. Disconnect the old charger from the charging port by gently pulling it out.
4. Take the new charger and insert it into the charging port until it clicks into place.
5. Replace the charging port cover.
6. Plug the charger into an electrical outlet and charge the jump starter according to the instructions in the user manual.

Note: Be sure to use only the manufacturer-recommended charger for the Power On Board 450 amp VECO12POB jump starter. Using a different charger can damage the jump starter and void the warranty.

UpBright AC Adapter Charger For Vector 450 Amp Jump Start System...

This is a generic charger cord listed by Amazon specifically for the Vector 450 Jump Starter.

The smart thing to do is, after using it for a jump start, leave it connected for 5 minutes and it is charged again... otherwise a normal 12 V charger will do on the clamps that go to the box... I use a 12V Stanley 25 amps when needed. But most of the time I keep it connected for 5 minutes and do not worry about it.

There is a charging port on the front of the unit next to the LED work light.
The wall charger it came with, is a 12VDC 500ma.
Positive center coaxial connector.
Radio shack usually can match the unit if you bring it in to them.
My charger was pouch Velcro-ed to the unit.
Kings Model KU3B-120-0500D

This unit should plug directly into an outlet-all you should need is an AC cord-cheers-Denny

I NEED A POWER SUPPLY AC ADAPTER FOR VECO12POB BATTERY JUMP START SYSTEM.

What your seeing there is indicating fully charged.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

I live in Brunswick Ga, can you tell me where to find a replacement ac charging plug and the cigarette lighter plug for my Vector Jump Start 450 amps,(VEC012c).Thank You Mr. Prior

charger reqwerment